Tag Archives: Washington State

Bakken Crude, CPC-1232, Crude By Rail, Oil spill, Tank car retrofit

McClatchy investigative reports result in enforcement actions

March 14, 2015 Roger Straw

Repost from McClatchy DC and The Bellingham Herald
[Editor: McClatchy News investigative reports have alerted Washington State and federal officials, and resulted in fines and enforcement actions. For background, see Washington state officials unaware at first of November oil spill (1/26); Officials say oil train leaked as it crossed Washington state (2/6); and Oil-loading facility sanctioned in Washington rail car spill (3/12). Don’t miss the excellent video near the end of this story. – RS]

More oil-train fixes: Feds order defective valves replaced on leaking cars

By Samantha Wohlfeil and Curtis Tate, March 13, 2015

APTOPIX Train Derailment — Derailed oil tanker train cars burn near Mount Carbon, W.Va., Monday, Feb. 16, 2015. A CSX train carrying more than 100 tankers of crude oil derailed in a snowstorm, sending a fireball into the sky and threatening the water supply of nearby residents, authorities and residents said Tuesday. MARCUS CONSTANTINO — AP

WASHINGTON — The Federal Railroad Administration on Friday ordered rail tank car owners to replace defective valves never approved for installation on thousands of tank cars, causing oil to spill from moving trains.

The directive applies to a 3-inch valve installed on roughly 6,000 tank cars, and their owners have 60 days to replace them. Within 90 days, tank car owners must also replace 37,000 1-inch and 2-inch valves manufactured by the same company. While the smaller valves were not found to be defective like the larger ones, they were not approved for the tank cars.

The affected cars can be used in the interim, but none can be loaded with hazardous materials if they are still equipped with those valves after the deadlines.

The enforcement action comes after a story last month in McClatchy’s Bellingham Herald about 14 tank cars that were discovered leaking en route from North Dakota’s Bakken region to the Tesoro refinery in Anacortes, Wash.

Friday’s enforcement action is the second to follow an investigation launched after McClatchy reported on leaking cars in Washington.

On Thursday, the agency said it had sanctioned the operator of a North Dakota loading facility for not properly closing a valve on another oil car after McClatchy reported in January that the car arrived at the BP Cherry Point refinery in northwest Washington state with 1,600 gallons missing.

That spill was discovered in early November but wasn’t reported to state officials until early December. Local emergency officials were never notified, according to a report sent by BNSF Railway to the U.S. Department of Transportation and the Washington state Utilities and Transportation Commission.

The 1-inch, 2-inch and 3-inch valves were all manufactured and sold by McKenzie Valve and Machining, a company in Tennessee. The Bellingham Herald could not immediately reach anyone at McKenzie, but left messages with the company Friday.

The Federal Railroad Administration also announced Friday that it was launching a full audit of the approval process for tank car components to determine why the unapproved valves were installed.

Under federal regulations, tank car valve designs must be approved by the Association of American Railroads Tank Car Committee.

The Federal Railroad Administration said it would begin working immediately with the association, which is the rail industry’s principal trade group in the nation’s capital.

Sarah Feinberg, the FRA’s acting chief, said Friday that removal of the valves will help reduce the number of non-derailment releases of hazardous materials.

“Any type of hazardous materials release, no matter how small, is completely unacceptable,” she said in a statement.

Ed Greenberg, a spokesman for the railroad association, said Friday that it supported the order. Railroads don’t own most of the tank cars used to transport oil.

“Officials from our association will be working closely with the administration in reviewing the tank car valve approval process to ensure the agency is fully satisfied with the current approval requirements that are in place,” he said in a statement.

The Federal Railroad Administration’s order came about a month after crews discovered tank cars leaking oil from their top fittings on a handful of trains hauling different types of crude oil through Washington state.

In mid-January, a train loaded with Bakken crude needed to have more than a dozen leaking cars removed at three separate stops as it traveled through Idaho and crossed Washington state.

The train was headed from Tioga, N.D., to the Tesoro refinery in Anacortes.

In a report to the U.S. Department of Transportation, BNSF reported a total of 26 gallons of oil leaking from 14 cars. Tesoro reported two more leaking cars. The oil was found only on the tops and sides of tank cars, and no oil was found on the ground.

Crews had first noticed oil on the side of a tank car while the train was in northern Idaho, and after checking the rest of the train, removed that car, which had leaked about two gallons, according to BNSF spokeswoman Courtney Wallace.

After the train had crossed through the state, following the Columbia River to Vancouver, Wash., crews found that crude oil had leaked onto the top of seven more cars, which were removed from the train on Jan. 12. BNSF reported the incident to the state Department of Ecology on Jan. 23.

BNSF also reported that about 10 gallons total had leaked from six more cars removed in Auburn on Jan. 13.

Wallace said the railroad would work with customers and shippers to take the required actions.

“Although BNSF does not own the tank cars, nothing is more important to us than safely operating through the communities that we serve,” she said in a statement.

The state Utilities and Transportation Commission and the FRA investigated the cars that were pulled from the train in Vancouver, which led to the discovery that closure plugs on the valves caused damage to the valve’s seal, and when tightened, would press down on and damage the ball.

The cars involved were CPC-1232 model cars built after 2011, which some oil companies have started using after several fiery derailments caused concerns about older DOT-111 rail cars, which have been found more likely to puncture or burst.

However, newer CPC-1232-standard cars that lack features that reduce damage from punctures and fire exposure have performed no better in four recent oil train derailments in West Virginia, Illinois and Ontario.

The White House Office of Management and budget is reviewing a new tank car standard proposed by the Department of Transportation. It is scheduled for publication on May 12.

Wohlfeil, of The Bellingham Herald, reported from Washington state. Tate reported from Washington, D.C.

Bakken Crude, Crude By Rail, Local Regulation

Washington county puts the brakes on a new oil-train facility

March 12, 2015 Roger Straw

Repost from High Country News

A Washington county puts the brakes on a new oil-train facility

In the wake of recent oil-train derailments, Skagit County wants Shell to do a full environmental review.

Jeremy Miller, March 12, 2015

BACKSTORY
Railroad cars full of flammable crude oil are rattling through the West, hauling more than six out of every 10 barrels produced in the Bakken to refineries, according to a 2014 report. Washington state has already seen a major uptick in oil-train traffic and at least one derailment. Shell Oil wants to build a new facility north of Seattle that would take in six 100-car locomotives per week (“Flash point,” HCN, 11/24/14).

FOLLOWUP
Last month, following West Virginia’s massive oil train derailment and explosion and reports of a Bakken train leaking oil in Washington, Skagit County blocked Shell’s proposed facility until the company completes a full environmental review. The U.S. Department of Transportation predicts an average of 10 oil train derailments per year over the next two decades. But the recent drop in oil prices means fewer trains are rolling out of the Bakken; perhaps — at least for now — there’s less chance of another disaster.

Crude By Rail, Marine transport, Spill prevention and response, Tar sands crude

Pacific Northwest editorial: Tar sand expenses must stick on those who profit

February 12, 2015 Roger Straw

Repost from The Daily Astorian, Columbia Pacific Region

Editorial: Tar sand expenses must stick on those who profit

Up to 10 mile-long tar sands trains per month are now moving between Canada and destinations on Puget Sound, Portland and California.

February 12, 2015, The Daily Astorian

Compared to ordinary unrefined petroleum, crude oil originating in the vast tar sand deposits of Alberta, Canada and nearby areas of the U.S. is distinctly more challenging to clean up if it spills.

There is surprising news this week that a great deal of it is moving along the Columbia River and elsewhere in Washington and Oregon — without any spill-response plan in place among state environmental agencies.

Oregon Public Broadcasting reporter Tony Schick did a good job illuminating tar sands issues in a story Monday. Due to a gap in the law that required communications between shippers and agencies for U.S. tar sands but not the same material from Canada, regional train traffic has rapidly expanded just since late November 2014. Up to 10 mile-long tar sands trains per month are now moving between Canada and destinations on Puget Sound, Wash., Portland and California.

There are “good news” components in this. Petroleum processed from tar sands is a large part of why gasoline prices have gone down, as North America again becomes a net exporter of energy. This surge in domestic production, transportation and shipping of crude oil generates profits, jobs and taxes.

But it is nevertheless surprising to learn that vast quantities of a distinctly hazardous substance are being transported around the Pacific Northwest without anything like an appropriate level of preparation for spills — disasters that are virtually inevitable.

Plain old crude oil and petroleum are bad enough from the perspective of spills. In the latest of in a series of excellent stories, Sightline Daily notes that U.S. Coast Guard Sector Columbia River already responds to about 275 oil pollution incidents a year. But pending plans for additional fossil fuel shipments could triple the number of tankers crossing the Columbia bar and double major vessel traffic on the river as a whole.

A good deal of this traffic would involve tar sands crude, which OPB describes as much worse to clean up. Canadian tar sands produce bitumen, a heavy tar-like material that is sticky and heavier than water. Because it sinks and adheres to everything it touches, cleanups are time consuming and expensive — more than $1 billion in the case of a burst bitumen pipeline in Michigan.

All this has caught U.S. Sen. Ron Wyden’s attention. “It is unacceptable that volatile tar sands oil has been moving through our communities for months, and yet Oregon officials only found out about it last week,” he told OPB. He is working on a strong rule that would ensure that local and state emergency responders are kept in the loop about tar sands shipments.

Beyond this, it is vital that the expense of insuring against spills and making things right afterward are fully absorbed by those profiting from tar sands exploitation. Northwest citizens must be guaranteed that we won’t get stuck holding an empty bag when a tanker wrecks on the bar or an oil train derails in some formerly pristine location.

The oil industry is rife with examples of leaving messes behind for others to deal with. This time, things absolutely must be different. Those who profit must shoulder all the financial risk.

Alberta Canada, Crude By Rail, Emergency Readiness & Response, Spill prevention and response, Tar sands crude, Union Pacific Railroad

Washington, Oregon officials caught by surprise: unit trains of tar sands moving through NW and CA

February 12, 2015 Roger Straw

Repost from Oregon Public Broadcasting
[Editor: Significant quote for us in California: “The trains originate in Alberta, moving through Idaho to Washington. From there, some are bound for refining in Western Washington and others travel along the Columbia River into Portland and south into California.” – RS]

Big Trainloads Of Tar Sands Crude Now Rolling Through NW

By Tony Schick, Feb. 9, 2015

Since 2012 Union Pacific has been moving oil through Oregon on mixed freight trains. In late 2014, the railroad began moving several mile-long trains of crude oil per month through the Northwest. Kool Cats Photography / flickr

Trains carrying mass loads of heavy crude oil from Canada’s tar sands have begun moving through the Northwest, creating the potential for an oil spill in parts of Oregon and Washington where environmental agencies have no response plans or equipment in place.

Union Pacific now moves between seven and 10 of these mile-long trains of Canadian crude per month through Northwest states, according to railroad spokesman Aaron Hunt. They can carry more than a million gallons of oil.

The trains originate in Alberta, moving through Idaho to Washington. From there, some are bound for refining in Western Washington and others travel along the Columbia River into Portland and south into California.

The seven to 10 monthly trains represents a big increase over Union Pacific trains that had previously been hauling mixed freight that included oil tank cars. The mile-long “unit trains” began in late November, according to the railroad, but spill planners at Oregon’s Department of Environmental Quality and Washington’s Department of Ecology didn’t learn of the new shipments until late January and early February, respectively.

Both agencies, along with emergency responders and rail safety inspectors, were previously caught unprepared in 2013 when shipments of sweet light crude from North Dakota’s Bakken oil fields started moving through the region.

Railroads are required to notify states about oil shipments larger than one million gallons under an emergency order from the federal Department of Transportation. The order was filed in response to national concerns about local fire departments being caught unaware or kept in the dark when these “rolling pipelines” were passing through their jurisdictions.

That order applies only to Bakken crude; shipments from Canada are exempt. Oregon Sens. Ron Wyden and Jeff Merkley have called on the federal DOT to expand its regulation to include all shipments, with the aim of avoiding a situation like mile-long trains of tar sands crude moving without knowledge from the agencies tasked with oil spill cleanup.

“It is unacceptable that volatile tar sands oil has been moving through our communities for months and yet Oregon officials only found out about it last week,” Wyden said in a statement released to OPB/EarthFix. “This apparent lack of communication with state officials responsible for Oregonians’ health and safety is exactly why I have been pushing for an iron-clad rule to ensure first-responders in our communities are notified about these oil trains.”

Officials in Oregon and Washington said they lack the resources and authority for adequate spill planning along rail corridors. Rail lines touch more than a hundred watersheds in Oregon and cross more than a thousand water bodies in Washington.

Unlike plans for marine transports and storage facilities, plans for who responds, how and with what equipment are lacking in Oregon and Washington when it comes to rivers and lakes.

“We will respond, but our response won’t be as effective as it would be with the facilities where we’ve reviewed their plans, we know what they contain,” said Bruce Gilles, emergency response program manager at Oregon’s DEQ.

Should a train full of tar sand oil spill today, response teams will be “going in somewhat blind,” and that means they won’t be able to work as quickly as they should, Gilles said.

“You’re going to lose time, and that time translates into increased environmental damage and costs to clean up,” he said. “That’s the bottom line.”

David Byers, response manager for Washington’s Department of Ecology, said the state has begun filling the regional gaps where it lacks response plans, but the effort will take years.

Byers said tar sands crude presents many cleanup challenges the state’s never handled before.

Bitumen is a hydrocarbon extracted from Alberta’s tar sands. It’s too thick to be transported like conventional crude. It’s either refined into a synthetic crude — making it more like conventional crude oil — or combined with additives that give it a more liquid consistency.

A heavy tar-like substance, bitumen can sink when it hits water. It’s also stickier, meaning it’s tougher to remove from wherever it spills. That’s what happened when a pipeline burst and spilled into the Kalamazoo River in Michigan. The cleanup cost exceeded $1 billion.

Frequent rain and fast-moving rivers in the Northwest mean a lot of sediment that oil can stick to, further complicating cleanup.

Byers and Gilles say they have no way of knowing what specific type of crude is in a given oil tanker car. Knowing that they’re dealing with a tar sand crude oil spill would dramatically influence their response.

“It’s much harder to clean up on the bottom of a river bed,” Byers said. “Or if it sinks in, for example, Puget Sound, it’s going to be more difficult to clean up, and even more challenging for us to even locate and detect where the oil has migrated to.”

It wouldn’t just be up to Oregon or Washington officials to handle spill-response duties if an oil train derailed in their state. Union Pacific has 30 hazardous materials responders across its 32,000 mile network and relies on private contractors for handling spill incidents.

“This team of experts directs training, preparation and response for any type of accident involving hazardous materials,” spokesman Aaron Hunt said in an email. “We move hazardous materials on behalf of our customers because it is our job.”