Tag Archives: Rail inspection

Inspection finds faulty switch, critical rail and tank car safety defects

Repost from The Times Union, Albany NY

Faulty switch slows trains

Speed limit lowered after defect that could cause derailment found
By Brian Nearing | December 15, 2014
Port-of-Albany_650
Oil tanker and freight cars at the Port of Albany are seen from Corning Tower Monday afternoon, Dec. 15, 2014, in Albany, N.Y. Speed limits for trains were lowered on tracks near a large industrial park near Voorheesville that are commonly used by massive trains carrying flammable crude oil after state and federal safety inspectors found a faulty switch that could have caused a derailment. (Will Waldron/Times Union)

Trains were slowed on tracks last week near a large Albany County industrial park — where passing trains routinely carry dozens of tankers filled with flammable crude oil — after state and federal safety inspectors found a faulty switch that could have caused a derailment.

That switch, which feeds trains into the 550-acre Northeast Industrial Park, was examined Dec. 9 as part of the eighth statewide inspection of oil trains and tracks ordered by Gov. Andrew Cuomo in response to safety concerns about a surge of crude oil shipments through New York from the Bakken fields of North Dakota.

The switch is about three miles north of the village of Voorheesville and feeds trains into the park, which itself contains about 15 miles of tracks.

“We have sent inspection crews to check rail tracks and crude oil cars across New York and we continue to find critical safety defects that put New Yorkers at risk,” the governor said in a statement issued Monday. “We will remain vigilant and will continue to use all available resources to ensure that crude oil transporters are held to the highest safety standards.”

In the Capital Region, the speed limit on the CSX-owned track around the switch was lowered from 50 mph to 25 mph last week after inspectors from the state Transportation Department and Federal Railroad Administration found the switch was too narrow by just an eighth of an inch, said DOT spokesman Beau Duffy.

The switch could have been damaged by passing trains, or could cause a train to derail, he said. Duffy said the switch was repaired and higher speed limits have been restored.

The park is owned and managed by the Schenectady-based Galesi Group. A spokeswoman for company Chief Operating Officer David Buicko said the company was not made aware of the switch issue and learned of it from a Times Union reporter.

“We are committed to strong, ongoing and long-term coordination with state and local officials and will continue our aggressive program of inspection and maintenance of the entire CSX network,” said CSX spokesman Rob Doolittle. “Upon being made aware of the defect, CSX implemented a speed reduction in that area. The switch was repaired over the weekend and the speed restriction has been lifted.”

Cuomo’s office announced that state and federal inspectors examined about 95 miles of track — from Schenectady to Selkirk, and from Albany to Whitehall in the Capital Region, as well as from Plattsburgh to the Canadian border in the North Country.

In addition to the faulty switch, inspectors found about 30 violations on tracks, including “critical problems” like missing bolts from a rail joint and an “insecure switch point heel.”

Inspectors at the Canadian Pacific Railway-owned Kenwood yard at the Port of Albany also examined 478 DOT-111 tanker rail cars, which are commonly used to haul Bakken crude. Found were 16 “non-critical defects,” including worn brake shoes, defective wheels and other issues.

Non-critical rail defects must be repaired within 30 days. Non-critical tank car defects must be fixed before the train departs the yard.

Other inspections were done at rail yards and tanker cars in western New York, uncovering another five “critical defects,” including two broken rails at the Dunkirk and Buffalo-Frontier rail yard, and DOT-111s with defective brakes, a cracked weld and missing bolts.

Senate appropriations bill takes on safety of shipping oil by rail

Repost from TribLIVE, Pittsburgh, PA

Safety of shipping oil by rail addressed in appropriations bill

By Jodi Weigand, Dec. 17, 2014

Provisions pushed by U.S. Sen. Bob Casey to improve the safety of crude oil shipments are included in the final version of the appropriations bill that will fund the federal government for the next nine months.

Casey began pushing for more money for rail safety after three train derailments in the state this year, including one in Vandergrift in February.

“This program was not included in the original House bill, so it needed a strong push from the Senate (and) Casey to make it in the final package,” said Casey’s spokesman John Rizzo.

The $54 billion in appropriations for transportation, housing and urban development includes funding for 15 new rail and hazardous material inspectors. It also calls for $3 million to expand the use of automated track inspections for 14,000 miles of track and $1 million to pay for online training for first responders on how to handle train derailments.

The Senate on Saturday approved the 2015 Omnibus Appropriations Bill that the House narrowly passed Thursday.

Casey’s bill requires the Pipeline and Hazardous Materials Safety Administration to finalize regulatory action to change tank car design standards by Jan. 15. The PHMSA began the changes in September 2013.

Among the new requirements is that newly manufactured and existing tank cars that are used to haul crude oil have puncture resistance systems and protection for hatches and valves that exceed the existing design requirements for the DOT-111 tankers, an old-style variety that critics say are too flimsy.

In the event that there is a trail derailment that involves a crude oil spill, new funding will ensure that first responders have better training on how to handle it.

The money in the bill for a web-based hazardous materials emergency response training curriculum will help ensure that communities that lack the resources to send their first responders to training sites can still access education to contain oil spills and prevent danger to people and communities.

“Funding will also be used to expedite implementation of a remote automated track inspection capability to increase inspection mileage at a reduced cost,” Rizzo said. “There is too much track for manual inspections to cover it all.”

U.S. Sen. Patty Murray, D-Wash., chairwoman of the Senate Appropriations Subcommittee on Transportation, Housing and Urban Development, said she’s pleased the bill would mandate comprehensive oil spill response plans for railroads and provide funding focusing on providing safety training.

“I worked to set a deadline for the Department of Transportation to issue new safety standards for tank cars next month and worked to protect smaller communities without sufficient resources to respond to oil trains,” Murray said.

A federal investigation into the Feb. 13 derailment and oil spill in Vandergrift determined that “widening,” or spreading of the rails on that section track, was the probable cause.

The report said that speed did not cause the derailment. However, two railroad experts said it was a contributing factor because speed could have caused track problems on the curve.

Federal inspectors find 100 defects on crude oil trains, tracks

Repost from the White Plains NY Journal News on LoHud.com
[Editor: Significant quote: “At the CSX-owned Frontier Rail Yard in Buffalo, 106 DOT-111 crude oil tank cars were checked and three had found to have critical defects, including a cracked weld, a missing bolt and one inoperative brake assembly….Since the state began its “inspection blitz” last February, inspectors have examined 7,368 rail cars (including 5,360 DOT-111s) and 2,659 miles of track, uncovering 840 defects, and issuing 12 hazardous materials violations. The state recently hired five new rail inspectors.”  – RS]

Inspectors find 100 defects on crude oil trains, tracks

By Khurram Saeed, December 15, 2014
train
State and federal railroad safety officials have inspected more than 7,300 rail cars and 2,600 miles of track since last February in response to increase shipments of Bakken crude across nearly 1,000 miles of New York. (Photo: Associated Press)

A broken rail, defective train car wheels and missing bolts on the tracks were among some of the problems state and federal teams found during its most recent round of statewide inspections of oil trains and the rail lines they use.

They identified 100 defects, including eight safety defects that require immediate action, Gov. Andrew Cuomo’s office said in a release.

Inspection teams from the state Department of Transportation and the Federal Railroad Administration on Dec. 9 examined 704 crude oil tank cars and about 95 miles of track as part of the state’s on-going response to a surge in rail shipments of Bakken crude across nearly 1,000 miles of New York.

They did not look at the River Line, the track owned by CSX Corp. that runs through the Hudson Valley, including Rockland. As many as 30 trains carrying 80 to 100 tank cars filled with explosive crude oil from the Bakken shale formation in North Dakota head south to East Coast refineries.

But the inspection of 15 miles of CSX-owned mainline track near Albany found a critical switch gauge defect that required a speed reduction, the release said. They also discovered four non-critical defects, including loose bolts. They must be repaired within 30 days.

“We have sent inspection crews to check rail tracks and crude oil cars across New York and we continue to find critical safety defects that put New Yorkers at risk,” Cuomo said in a statement.

Crude oil tank cars, especially the older DOT-111 models are also in the spotlight because they have been involved in several accidents, including an derailment and explosion that killed 47 people in Quebec in July 2013. Bakken crude is volatile and can catch fire should the tank rupture or derail.

The federal government is reviewing rules that would increase safety standards.

At the CSX-owned Frontier Rail Yard in Buffalo, 106 DOT-111 crude oil tank cars were checked and three had found to have critical defects, including a cracked weld, a missing bolt and one inoperative brake assembly.

CSX spokesman Rob Doolittle said in an email that the railroad “appreciates Governor Cuomo’s continued focus on making the safe transportation of energy products even safer,” adding that CSX is “committed to strong, ongoing and long-term coordination with state and local officials.”

Since the state began its “inspection blitz” last February, inspectors have examined 7,368 rail cars (including 5,360 DOT-111s) and 2,659 miles of track, uncovering 840 defects, and issuing 12 hazardous materials violations. The state recently hired five new rail inspectors.

A matter of faith: Rail bridge conditions hidden from public view

Repost from The Wisconsin State Journal

A matter of faith: Rail bridge conditions hidden from public view

By Chris Hubbuch, December 14, 2014
BNSF Railway workers reinforced this railroad bridge south of Stoddard with cribbing last June. The bridge has been scheduled for replacement in 2015.  (Click image for 2 more photos.)

STODDARD — On the afternoon of June 6, Kevin Gobel pulled into town after work and noticed dozens of railroad workers and trucks gathered near the village’s only railroad crossing.

Perturbed at trucks parked across the tracks and blocking the road, Gobel, the village president, went looking for whoever was in charge to ask what was going on.

The answer: We’ve got a real problem at the bridge south of town.

Gobel, who is also a Vernon County supervisor, called Chad Buros, the county’s emergency management director. Together they drove about three quarters of a mile south on Highway 35 to where a swarm of crews were busy working on the BNSF Railway bridge over the mouth of Coon Creek.

As it turned out, the problem was an “incipient failure” on one span of the 112-year-old bridge, according to the Federal Railroad Administration. Train traffic was halted for 12 hours as crews put timber blocking under the span and nine others “that appeared susceptible to the same mode of failure.”

But six months later, Gobel still has little information about the bridge, which carries an average of 16 million gallons of volatile crude oil each day.

“Nobody’s ever gotten an official report from BNSF” about happened in June, he said. “Local governments need to be informed of what’s going on. I haven’t seen any documents stating what the status of (those) bridges are.”

Local officials and the general public are largely in the dark about the nation’s freight railroads, which carry growing volumes of flammable crude oil, while state and federal governments have limited authority and oversight.

And when it comes to rail bridge safety, the industry is generally left to police itself.

Concerned citizens have documented cracked and crumbling rail bridges along the Wisconsin side of the Mississippi River that engineers say are troubling and that prompted federal authorities to take a closer look. BNSF assures the public the bridges are safe, but the government does not have structural engineers to independently verify their claims. And unlike highway bridges, inspection reports are secret, unavailable to the public and local officials.

There isn’t even an inventory of bridges.

“What makes me nervous is the responsibility of safety for railroad bridges rests with the owner of the track. You’d like to think they use good faith and safety and upkeep of the bridges … but it only takes some poor owners that don’t take it as seriously,” said Pat Salvi, a Chicago attorney who handles rail accidents. “The consequences are so potentially dramatic.”

BNSF says its bridges are inspected at least once a year — some twice or more — by trained bridge inspectors as well as structural engineers, consultants and contractors. Canadian Pacific, which carries far less oil, says it also has a rigorous inspection program. Both maintain inventories.

But neither the reports nor the inventories are available to the public.

Railroad bridge failures are rare, said Frank Douma, a research fellow at the University of Minnesota’s Humphrey School of Public Affairs and the Center for Transportation Studies.

Yet he acknowledges the stakes are higher when trains are hauling hazardous materials: “The difference between an oil train and a grain train derailing is what happens when it derails.”

Little oversight, little access

The Federal Railroad Administration is tasked with oversight and enforcement of rail safety.

In a 2007 report, the federal Government Accountability Office outlined how little oversight the agency exercises over rail bridges, more than half of which were built before 1920.

The GAO recommended, among other things, that the FRA devise “a systematic, consistent, risk-based methodology for selecting railroads for its bridge safety surveys.”

In addition, a joint FRA-industry committee recommended the agency create and maintain a detailed bridge inventory. That never happened.

Since the release of that report, the agency has created a bridge inspection program, which spokesman Mike England said entails audits of the railroads’ inspection programs as well as spot checks by FRA inspectors.

But there are just six inspectors for the nation’s estimated 76,000 rail bridges; only two are engineers.

“The railroad has the oversight of the bridge. The FRA has oversight of the railroad,” said Greg Baer, statewide railroad structure and track engineer for the Wisconsin Department of Transportation.

According to records obtained through the Freedom of Information Act, in the four years since the bridge inspection program was adopted, the FRA has looked at just 14 Canadian Pacific bridges in eastern Wisconsin, and none in Minnesota. It has yet to conduct a regular inspection of a BNSF bridge on more than 1,800 miles of track in either state.

The FRA has yet to produce any documents in response to a September request for audit records. And while the FRA has access to the railroads’ structural inspection reports, those documents are hidden from public view.

England said the primary objective of FRA bridge inspections is to verify the bridge’s physical appearance matches what’s in the railroad’s report — to “make sure they’re not fudging anything” — but that inspections are thorough.

But inspection reports obtained by the La Crosse Tribune offer little detail.

An FRA inspector’s July 30 report of a Canadian Pacific bridge in Milwaukee, reads in full:

“Observation of Bridge 84.99 and review of the latest bridge inspection report. This bridge includes a TRT swing span over the Menominee River. This bridge has 3 spans, TRT and beams, concrete substructure, open deck, double track, and is 293’ long. Bridge conditions observed generally correspond with conditions reported on bridge inspection report dated 6/18/2014.”

“It’s a detailed inspection,” England said. “They’re not going to put anything in the report unless they find something wrong.”

The reports show that inspector looked at 13 bridges in a single day along nearly 45 miles of track in two counties.

By comparison, a recent DOT inspection report on a 262.4-foot viaduct on Copeland Avenue in La Crosse describes in detail minor cracks and other features. A routine inspection report on La Crosse’s Cass Street bridge is 86 pages.

Douma notes that unlike highways and airports, which are built and maintained by government, railroads are and always have been private enterprises. They came into existence at a time when the federal government was much smaller, and at least as concerned about keeping the union together as moving people across the continent.

Prior to the 1980s, railroads were subject to strict economic regulation, but the rails have always been on private land and largely out of government oversight.

Earlier this year, the state of California launched its own rail bridge inspection program in response to increasing oil train traffic and what one report labeled “the dearth of information and lack of regulatory oversight regarding the structural integrity of California’s rail bridges.”

The FRA says it is the only such state-run program in the nation.

The PUC would not make officials available for an interview, but an agency spokesman said by email they are in the process of hiring two bridge inspectors and will implement the new program “as soon as possible.”

“I don’t mean to criticize the railroads’ programs, but for the public to have the confidence that bridges are in good shape, our role is to offer oversight,” PUC Rail Safety Deputy Director Paul King told the Sacramento Bee. “Given the heightened risk of one of these crude oil trains derailing and given the projections of significant increase in tonnage across these bridges, we need to fulfill this role.”

The FRA does have the authority to order a bridge closed, as it did in 1996, 1999 and most recently 2006. In each case, orders were issued only after the owners of the bridges ignored repeated warnings to repair serious defects.

The typical maximum civil penalty for violations is $25,000, though in cases of “grossly negligent violation or where a pattern of repeated violations has caused death or injury or an imminent hazard of death or injury” fines can reach $105,000.

“That’s not really much of a hammer,” Salvi said.

According to FRA records, BNSF settled 418 track safety violations in 2012, the most violations per mile of any of the seven Class 1 railroads. Those track violations resulted in fines of $865,000, of which BNSF paid $569,725.

Last year, BNSF reported a pre-tax profit of almost $6.7 billion on revenues in excess of $21.5 billion.

Bridge conditions spark concern

In June, when the swarm of workers showed up to fix the bridge in Stoddard, Guy Wolf started to get worried about the state of the bridges near his home in Mohawk Valley.

Wolf, a retired university retention specialist and avid angler, used a kayak to navigate up the mouth of Coon Creek to get a closer look at the emergency repairs.

“What really concerned me — they had things circled. Cracks,” he said. “You could begin to see that parts of the bridge were lower (than other parts). All this lumber stacked up under the bridge.”

He started looking at other bridges and was startled at their appearance. Over the summer, Wolf and La Crescent wildlife photographer Alan Stankevitz, who runs a blog where he tracks rail safety issues, began photographing rail bridges along the Mississippi River backwaters between La Crosse and Prairie du Chien.

They documented cracked supports, exposed reinforcing steel rods, and chunks of missing concrete.

But looks can be deceiving, according to the railroad, which assures all the bridges are sound.

“Railroad bridges are typically not pretty; but they are functional and safe,” BNSF spokeswoman Amy McBeth said. “The visual appearance of these structures is not indicative of their structural integrity.”

While it is impossible to determine a bridge’s structural integrity from photographs, four engineers who looked at the photos agreed there are signs of serious deterioration.

Al Ghorbanpoor, a professor and director of the Structural Engineering Laboratory at UW-Milwaukee, said while a thorough assessment would be required, “the photographs give the impression that the condition of these bridge structures should be of concern. There is clear evidence of excessive deterioration that could have negative impact on the structural integrity of these bridges.”

Most agreed the Coon Creek bridge was the most troubling, though John Zachar, a professor of architectural engineering Milwaukee School of Engineering, expressed concerns about the pictures of a bridge in Genoa where concrete breakage has left exposed rebar at the base of piers and on one of the spans.

“That is a significant structural deficiency,” Zachar said. “I’d say there’s no question about it. This is something we ought to look at.”

But John Bennett, a former vice president of planning and systems for Amtrak and policy adviser, said rail bridges can be sound even after losing some of their structural integrity.

“Many of these bridges were built 50 or 100 years ago, (when) standards weren’t as well known,” Bennett said. “Many of these bridges have been overbuilt in terms of strength.”

Wolf and other rail safety activists presented the photos to Sen. Tammy Baldwin, who wrote to the FRA in September urging a quick inspection of the bridges.

The FRA says it sent inspectors to look at a dozen Mississippi River bridges and a letter to Baldwin said neither BNSF nor its own inspections revealed any conditions “that inhibit the ability of these bridges to safely carry rail traffic.”

But the agency did not release those reports in response to a FOIA request and has declined to provide access to them.

According to the letter, the four bridges pictured were built between 1911 and 1923 and show deterioration — cracking and spalling concrete, exposed rebar — typical for rail bridges of that age.

The letter also notes that BNSF is monitoring the Coon Creek bridge, and the temporary blocking, through twice weekly inspection. The FRA went on to say BNSF is inspecting its bridges twice as often as required by the agency and accurately documenting conditions.

Reinvesting revenues

Railroads have enjoyed substantial growth in revenue and profit in recent years as the U.S. economy has recovered.

BNSF says it is sinking record amounts of that money back into its infrastructure: the railroad spent $5.5 billion last year on capital improvements, and has announced plans to spend $6 billion this year — about half of that on maintaining its physical infrastructure, such as tracks and bridges.

Indeed, workers this fall cut an access road to the Coon Creek bridge in preparation for its replacement, which BNSF said was scheduled for 2015 even before the most recent problems were detected.

The American Society of Civil Engineers gave the railroad industry a C+ in its most recent report card on U.S. infrastructure, which Bennett said is largely due to the investments the big four railroads are making in their infrastructure.

In fact, Bennett said, railroad infrastructure is generally better funded than highways.

“One of the good things about the railroad, they have a business model that actually works — they’re able to extract enough profits from operations to invest in infrastructure,” he said. “As opposed to highways. … The highway bridge systems are much more perilous in terms of getting funding.”

“It’s certainly in our best interest to prevent accidents and keep our infrastructure sound,” McBeth said. “That’s why you see record investments in infrastructure.”