Tag Archives: Train speed

Rail Industry Requests Massive Loophole in Oil-by-Rail Safety To Extend Bomb Trains Well Beyond 2025

Repost from DeSmogBlog

Rail Industry Requests Massive Loophole in Oil-by-Rail Safety To Extend Bomb Trains Well Beyond 2025

By Justin Mikulka, July 21, 2016 – 13:00

In the most recent oil-by-rail accident in Mosier, Oregon the Federal Rail Administration (FRA) concluded that the tank cars involved — the jacketed CPC-1232 type — “performed as expected.” So an oil train derailing at the relatively slow speed of 25 mph should be “expected” to have breached cars resulting in fiery explosions.

Current regulations allow those tank cars to continue rolling on the track carrying volatile Bakken crude oil and ethanol until 2025 with no modifications.

Yet industry lobbying group the Railway Supply Institute (RSI) has now requested the Federal Railroad Administration to essentially allow these jacketed CPC-1232 tank cars to remain on the tracks for decades beyond 2025.

This was just one of the troubling facts that came to light at the National Transportation Safety Board (NTSB) roundtable on tank car safety on July 13th, and perhaps the one of greatest concern to anyone living in an oil train blast zone like Mosier, Oregon.

Just Re-Stencil It and Call It a DOT 117

One of the biggest risks with Bakken oil train accidents is that often the only way to deal with the fires is to let them burn themselves out. This can result in full tank cars becoming engulfed in flames for hours or days in what is known as a pool fire. This can lead to a “thermal tear” in the tank and the signature mushroom cloud of fire so often seen with these derailments.

The new regulations address this issue by requiring tank cars to have a layer of ceramic insulation covering the entire tank car to prevent the oil from heating up to the point of creating a thermal tear (ceramic shown in pink in the image below.)


Image credit: NTSB

However, the RSI has requested the FRA to allow the existing jacketed CPC-1232 cars, like the ones in the Mosier accident, to not require the ceramic thermal protection.

The industry’s argument is that the current fiberglass insulation on the CPC-1232 is sufficient protection. However, the fact that the fiberglass insulation was not designed to protect the contents of a tank car from fire does not seem to bother the RSI.

At the same time the RSI is arguing against thermal protection for CPC-1232s, the RSI has helpful videos on its website explaining the new safety features for DOT-117 tank cars — including “thermal protection.”

The NTSB’s Robert Sumwalt summed up what this request would mean in one simple statement at the July 13 round table event saying, “the same type of cars as in Mosier can be re-stenciled as DOT-117R with nothing more than a new bottom outlet valve.” [R stands for retrofit.]

So, they are essentially asking to paint over the CPC-1232 label on the tank cars with a DOT-117 while doing nothing more than changing the bottom outlet valve. Which means we should expect many more accidents like Mosier in the future since most of these CPC-1232 cars are only a few years old and they have an expected working life of 30-40 years.

As Robert Sumwalt said in his opening statement explaining why we should expect many more fiery oil train derailments with the existing tank car fleet, “just do the math.”

Industry Arguments Laughable If Not For the Consequences

Would you believe that one of the arguments made at the roundtable in favor of not requiring thermal protection on these cars was that the oil itself acts as a heat sink? Which is true. Until the point where the oil absorbs so much heat from the fire that the tank car explodes.

However, the reason this argument is given credibility is that the regulations only require a tank car to endure sitting in a pool fire for 100 minutes without exploding. Forget the fact that many of the Bakken oil train accidents have involved fires that burned for days.

This 100-minute limit was the same reasoning used to justify the fiberglass insulation on the current jacketed CPC-1232 as offering sufficient protection, as per the industry request. Which led to the following exchange between the NTSB’s Sumwalt and RSI representative John Byrne.

Byrne: “In our own modeling the fiberglass insulation system met the federal requirement for thermal protection.”

Sumwalt: “But in reality in the fiberglass situation, doesn’t the fiberglass all just melt… doesn’t it also melt and all end up pooling down in the bottom in the void between the blanket and the shell?”

Byrne: “Basically yes…but at the same time, that whole system acts as a thermal protection system in that it meets the requirement based on the federal law.”

Sumwalt: “Ok, thanks. So it meets the requirements.”

So, along with the oil itself being offered as adequate thermal protection, we also get fiberglass that melts in a fire being offered as protection for anyone in the blast zone.

So what did the regulators have to say about this absurd argument?

FRA’s Karl Alexy made it clear that “industry” concerns were receiving serious consideration saying, “we’re not taking it lightly, we understand what it means to industry… be certain that we are taking this very seriously.”

Well, we do understand what it means to the industry. Adding ceramic thermal protection would cut into profits. And one thing that was made clear repeatedly during the day’s discussion was that this was all about the money and that safety was only for people worried about “risk.”

As usual when there is a discussion about oil train safety, the oil industry lobbying group the American Petroleum Institute had a seat at the table. API representative Susan Lemieux cut to the heart of the issue with some actual honesty.

“In the industry we don’t see transportation as a risk, it is just a function of business.”

Why try to improve the situation when you don’t see any risk?

The FRA and the Pipeline and Hazardous Materials Safety Administration have informed DeSmog that they will issue a formal response to the industry’s request to allow the fiberglass to qualify as thermal protection in the near future.

The Ground Rules – Profits Over Safety

In the above slide shown of the DOT-117, there is one other important thing to note. The shells on those tank cars are 9/16th of an inch thick. The shells of the jacketed CPC-1232 are 7/16th of an inch thick. This difference has safety implications as the thinner shells rupture more easily.  The RSI points out this fact in a video on its website about the advantages of the thicker shells on the DOT-117 which they say are “less prone to puncture.”

But the more important difference, as we have pointed out repeatedly at DeSmog, is that safer car designs are heavier, which means they can transport less oil per car. That lower capacity again cuts into profits. This point was made by ExxonMobil in a slide they presented to regulators arguing against thicker tank shells.

While Exxon was not at the roundtable, plenty of oil and rail industry representatives were, and they made this point very clear.

Gabe Claypool, President of oil train operators Dakota Plains, explained why it made economic sense to use CPC-1232s over DOT-117s.

“A lot of it’s economics as well…we were just having a conversation around the sizing of the car, the 1232 car type is very much in abundance and it is also a larger car. In the current category of still trying to be profitable, if I can get that extra volume in a larger car that is still regulatorally [sic] compliant, they’re [sic] gonna stick with that.”

Richard Kloster of rail consulting firm Alltranstek was one of the more vocal participants during the roundtable and he repeatedly made points about the economics of retrofitting the CPC-1232 over buying the new DOT-117 saying, “The retrofit is always going to win economically.”

Kloster also made it clear where the industry put its priorities when it came to safety versus profit saying, “There has got to be a balance between safety and the economic viability of moving these products by rail” and that there were a “lot of cases, you know, where economics wins all the time but risk trumps economics in some cases.”

Economics wins all the time.

There was one representative from labor at the roundtable who did not offer a comment until the final closing segment, but he also shared the reality of what was driving the decisionmaking when he discussed the need for safety but stated, “I know it’s about money.”

ExxonMobil Wins Again

So, in the end, ExxonMobil and the oil industry have won again. Watching this roundtable and the many congressional hearings and previous NTSB events in the past few years and seeing the lack of progress on real safety improvements, it almost seems like this all was orchestrated from the start.

In the years leading up to the latest tank car rulemaking, the industry essentially ordered a whole new fleet of CPC-1232 cars which they are currently using. The CPC-1232 cars have the thinner tank shells which makes them more prone to puncture and also more profitable. And they are ok to use, unchanged, until 2025. If the industry request is approved, those cars will just need new bottom outlet valves after 2025.

Regardless, they will always have the thinner tank shells, like Exxon wanted.

At the end of the July 13 event, Robert Sumwalt made an interesting statement. He said, “some of us met yesterday to go over the ground rules.”

The meeting where they went over the ground rules was not open to the public or media. If one were to hazard a guess as to what the first and foremost ground rule set was, it would be a safe bet to posit it was that “economics wins all the time.”

Blog Image Credit: Dawn Faught via NTSB

 

New Oil Train Safety Regs Focus on Accident Response, Not Prevention

Repost from Center for Biological Diversity

CenterForBiolDiv_logoNew Oil Train Safety Regs Focus on Accident Response, Not Prevention

Long Phase-out of Hazardous Cars, Inadequate Speed Limits Leave Communities at Risk of Explosive Derailments

For Immediate Release, December 7, 2015
Contact: Jared Margolis, (802) 310-4054

WASHINGTON— A new transportation bill signed by President Obama includes provisions intended to improve the safety of oil trains, but leaves puncture-prone tank cars in service for years and fails to address the speed, length and weight of trains that experts point to as the leading causes of explosive derailments. The bill upgrades safety features on oil train tank cars and requires railroads to provide emergency responders with real-time information about when and where dangerous oil cargoes are being transported but doesn’t do enough to prevent oil train accidents, which have risen sharply in recent years.

“While these regulations improve our ability to prepare for oil train disasters they do virtually nothing to prevent them from ever occurring in the first place,” said Jared Margolis, an attorney with the Center for Biological Diversity who focuses on the impacts of energy development on endangered species. “Until we dramatically reduce the speed and length of these bomb trains it’s only a matter of time before the next explosive derailment sends fireballs rolling through one of our communities.”

The new regulations will require all oil train tank cars to include fire-resistant ceramic coatings and protections for protruding top fittings. The final rule issued by federal regulators in May only required oil trains with 35 loaded oil tank cars or 20-car blocks of oil tank cars to implement the new standards, and would not have required the ceramic blankets or top fitting protections for all retrofitted cars.

But experts say even the protective measures included in the new transportation regulations signed into law on Friday will do little to prevent a spill if a train derails at speeds faster than 18 mph, and oil trains are permitted to travel at 40 mph to 50 mph. And the new regulations do not require the phase-out of dangerous puncture-prone tank cars to begin until 2018, and allows them to remain in service until 2029.

“It’s irresponsible to continue to allow these bomb trains to roll through the middle of our communities and across some our most pristine landscapes,” said Margolis. “We need to quit pretending we can make these dangerous trains safe and simply ban them altogether.”

Congress has directed the U.S. Department of Transportation to continue requiring notifications to states of train routes and frequencies so communities can better prepare to respond to train derailments, explosions and oil spills. However, the new regulations do nothing to remedy the track infrastructure problems, or the excessive length and weight of oil trains, cited as leading causes of derailments. Further, it remains unclear whether the public will have access to information about these hazards.

“Keeping information on oil trains from public scrutiny is outrageous, and only serves to protect the corporate interests that care little about the risk to the homes, schools and wild areas that these trains threaten,” said Margolis. “We need to keep these trains off the tracks and keep these dangerous fossil fuels in the ground, rather than keeping the public in the dark.”

Background 

The National Transportation Safety Board has repeatedly found that current tank cars are prone to puncture on impact, spilling oil and often triggering destructive fires and explosions. But federal regulators have ignored the safety board’s official recommendation to stop shipping crude oil in the hazardous tank cars. Recent derailments and explosions have made clear that even the newer tank cars, known as CPC-1232s, are not significantly safer, often puncturing at low speeds.

The recent surge in U.S. and Canadian oil production, much of it from Bakken shale and Alberta tar sands, has led to a more than 4,000 percent increase in crude oil shipped by rail since 2005, primarily in trains with as many as 120 oil cars that are more than 1.5 miles long. The result has been oil spills, destructive fires, and explosions when oil trains have derailed. More oil spilled in train accidents just in 2013 than in the 38 years from 1975 to 2012 combined.

The Center for Biological Diversity is a national, nonprofit conservation organization with more than 900,000 members and online activists dedicated to the protection of endangered species and wild places.

AP: Railroads beat back new safety rules after derailments

Repost from the Boston Herald

AP: Railroads beat back new safety rules after derailments

By Matthew Brown and Michael Kunzelman, December 05, 2015
FILE -In this Monday, Feb. 23, 2015, file photo, clean up continues near Mount Carbon, W.Va., where a train derailed and sent a tanker with crude oil into the Kanawha River. A little-known truth about North American railroads: No rules govern when rail becomes too worn down. Since 2000, U.S. officials blamed rail wear as the direct cause of 111 derailments causing $11 million in damage. (AP Photo/Chris Tilley, File)

A pair of train derailments in 2012 that killed two people in Maryland and triggered a fiery explosion in Ohio exposed a little-known and unsettling truth about railroads in the U.S. and Canada: No rules govern when rail becomes too worn down to be used for hauling hazardous chemicals, thousands of tons of freight or myriad other products on almost 170,000 miles of track.

U.S. transportation officials moved to establish universal standards for when such steel gets replaced, but resistance from major freight railroads killed that bid, according to Associated Press interviews with U.S. and Canadian transportation officials, industry representatives and safety investigators.

Now, following yet another major accident linked to worn-out rails — 27 tanker cars carrying crude oil that derailed and exploded in West Virginia earlier this year — regulators are reviving the prospect of new rules for worn rails and vowing they won’t allow the industry to sideline their efforts.

“We try to look at absolutely every place where we can affect and improve safety,” said Federal Railroad Administrator Sarah Feinberg. “Track generally is the place that we’re focusing at the moment, and it’s clearly overdue. Rail head wear is one place in particular that we feel like needs to be addressed as soon as possible.”

An official announcement on the agency’s intentions to revisit rail wear is expected by the end of the year.

In the meantime, federal regulators haven’t taken the positive steps that they need to, said Ronald Goldman, an attorney for the families of the two 19-year-old women who died in a 2012 derailment outside Baltimore.

“It’s a lack of will, not a lack of ability, in my opinion,” he added.

Industry supporters argue that the seven major freight railroads in the U.S. and Canada are in the best position to know what is going on with their lines, including when they need to be replaced or have the maximum speeds for trains traveling on them lowered. They also note a long-term decline in accidents that has reduced the frequency of derailments by more than 40 percent since 2000.

All sides agree it’s difficult to pinpoint how many accidents are tied to worn rail. Since 2000, U.S. officials blamed rail wear as the direct cause of 111 derailments causing $11 million in damage.

That’s less than 1 percent of all accidents, yet it masks a broader safety dilemma: Years of massive loads rolling over a rail will exacerbate defects in the steel, such as cracks or fractures. Investigators ultimately list the defect as the cause of a derailment, but it might never have been a problem if the rail had not been worn down.

“Rail defects are internal and rail wear is external, and when external meets internal, that’s when problems may arise,” said John Zuspan of Track Guy Consultants, a Pennsylvania firm that offers track inspections, safety training and other services for railroads.

Two accident causes in particular have the strongest correlation with worn-out rails: “detail fractures” that result from fatigued metal, and “vertical splits” in the head of the rail, where it makes contact with a train’s wheels, according to the FRA.

Those problems caused a combined 1,200 derailments with $300 million in damages, three deaths and 29 people injured in the U.S. between 2000 and the present, according to accident records reviewed by the AP.

Among them was the July 2012 derailment of a Norfolk Southern Railway train hauling ethanol and other products through Columbus, Ohio. Seventeen cars derailed, including three hauling highly flammable ethanol that exploded into flames, triggering an evacuation of surrounding neighborhoods.

A month later, another accident occurred involving a CSX Transportation train hauling coal over a bridge along Main Street in Ellicott City, Maryland, outside Baltimore. Twenty-one cars derailed when the company’s worn-down rail split beneath the weight of the coal cars. The two college students sitting on the bridge died, crushed by thousands of pounds of spilled coal.

The victims’ families reached a settlement with CSX last year for undisclosed terms. Goldman, the families’ attorney, said he pressed federal officials for a forum that would allow his clients to testify about the issue, but “nothing really happened.”

A month after the CSX derailment, federal regulators asked the Rail Safety Advisory Committee — a panel created by the Railroad Administration to include the industry and others in fashioning safety rules — to craft new standards to reduce the risks of worn-down rail. The committee set up a 116-person working group to tackle the problem, made up of industry representatives, government officials, consultants, researchers and railroad worker unions.

The group included 55 representatives from the major freight railroads and their industry organization, the Association of American Railroads. The FRA had 14 seats at the table and their counterparts from Transport Canada had five.

Following several meetings in 2012 and 2013, the group — which required consensus before recommending action — agreed on voluntary guidance for companies to manage rail wear, but no new regulations.

“There was certainly a lot of pushback and a lot of political pressure put on FRA not to adopt regulations for rail wear,” said Richard Inclima, director of safety for the union that represents track inspectors and a member of the working group. “Rail wear limits were on the table. The industry raised a lot of arguments against rail wear limits.”

“The industry doesn’t want to be regulated,” he added. “That’s no secret.”

The railroads’ opposition was confirmed by others involved with the group’s work including from the National Transportation Safety Board, the FRA and Transport Canada.

Association of American Railroads spokesman Ed Greenberg said the railroads were “unaware of any science-based data supporting rail wear limits.”

NTSB investigator Richard Hipskind, who took part in the Ellicott City and Columbus accident investigations and later served on the rail wear working group, said more research would be needed to establish universal standards.

Railroads have their own internal standards for rail wear, and have replaced more than 30,000 miles of rail since 2010, according to reports submitted by the major railroads to the U.S Surface Transportation Board, a semiautonomous agency under the umbrella of the U.S. Department of Transportation.

Standards vary among railroads and are complicated by differences in how much weight a given line bears, whether it’s in a wet or dry climate, and if the line goes through mountains or involves lots of turns. Those variables can make the difference between well-worn rail that’s still safe and routes that poses a heightened safety hazard, according to industry experts and safety officials.

Greenberg said the industry takes an aggressive approach to identifying and removing defective or worn sections of rail.

“Each railroad has its distinct operating environment and operating conditions that would be factored into this,” Greenberg said. He added that the industry was now interested in “renewed dialogue” with the FRA on the topic.

The AP requested details on rail wear standards from each of the seven major freight railroads — BNSF Railway, Union Pacific, Canadian Pacific, CSX, Canadian National, Norfolk Southern and Kansas City Southern. They either refused the request or referred questions to the railroad association, which also declined to release the standards.

Public attention to train derailments increased sharply after July 2013, when an out-of-control oil train derailed and exploded in Lac-Megantic, Quebec, killing 47 people. One of the most significant changes to emerge from that and other accidents involving crude and ethanol was a mandate for companies to phase out or upgrade tens of thousands of tank cars that are prone to rupture.

Those are important changes, said James Horbay, a rail safety engineer with Transport Canada. But what causes trains to come off the tracks in the first place needs to be resolved, he said.

“If you crash an airplane, are you going to say, ‘Let’s build an airplane that’s not going to fall apart when it hits the ground?'” he asked. “Whether rail wear is something that should be looked at is a good question to ask. You’re going right to the cause now.”


Matthew Brown reported from Billings, Montana.  Michael Kunzelman reported from Baton Rouge, Louisiana. 

“Uprail” government agencies critical of Valero Benicia environmental report

Repost from the Fairfield Daily Republic

Safety still a primary concern with Valero rail transport plan

By Kevin W. Green, November 07, 2015
The Valero oil refinery operates, Friday, Sept. 25, 2015, in Benicia.  (Steve Reczkowski/Daily Republic file)
The Valero oil refinery operates, Friday, Sept. 25, 2015, in Benicia. (Steve Reczkowski/Daily Republic file)

FAIRFIELD — Most of those who provided formal comments on the revised draft environmental impact report for the Valero crude-by-rail project in Benicia focused on a need for increased safety and possible mitigation measures.

The city of Benicia Planning Department received plenty of input leading up to last week’s deadline for submitting written comments on the revised report.

The proposed project would allow Valero to transport crude oil to its Benicia refinery on two 50-car freight trains daily on Union Pacific tracks that come right through downtown Davis on their way to Benicia. The trains also pass through Dixon, Fairfield and Suisun City.

The rail shipments would replace up to 70,000 barrels per day of crude oil currently transported to the refinery by ship, according to city documents. The Valero refinery would continue to receive crude by pipeline, the city said.

Among the written comments submitted on the revised impact report was an eight-page response from the Sacramento Area Council of Governments. The agency responded on behalf of the 22 cities and six counties in its jurisdiction, including the city of Davis and Yolo County.

“Our earlier letter expressed grave concern that the DEIR concluded that crude oil shipments by rail pose no ‘significant hazard’ to our communities, and we urged the city of Benicia to revise the DEIR to fully inform decision-makers and the public of the potential risks of the project,” SACOG said in its remarks.

The agency’s response included a list of eight measures its board of directors indicated that, at a minimum, should be followed.

Those directives include advance notification to county and city emergency operations offices of all crude oil shipments; limits on storage of crude oil tank cars in urbanized areas of any size; and appropriate security for all shipments.

Other directives outlined need for support, including full-cost funding for training and outfitting emergency response crews; and use of freight cars with electronically controlled pneumatic brakes, rollover protection and other features that mitigate what the agency believes are the risks associated with crude oil shipments.

Finally, the agency calls for the implementation of Positive Train Control to prioritize areas with crude oil shipments.

Solano County Resource Management Director Bill Emlen, a former Davis city manager, noted in his response that he had no specific comment on the revised report, but that the county stands behind its initial remarks about the original draft report.

In those remarks, dated Sept. 8, 2014, Emlen said the county wanted more done to address potential derailments.

The original draft EIR admitted the project “could pose significant hazard to the public or the environment,” but minimized the chances of that happening.

“Although the consequences of such a release are potentially severe, the likelihood of such a release is very low,” the report said.

Emlen disagreed that the accident risks associated with the crude-by-rail proposal are “less than significant” without mitigation.

Valero plans to use a type of tank car designated as CPC-1232 to transport oil between Roseville and Benicia and there will be a 40 mph speed limit through federally designated “high-threat urban areas,” including cities along the route, according to the draft report.

Emlen said it appears Valero’s use of the CPC-1232 tank cars is voluntary, rather than mandatory. He also pointed out that the federal designation for high-threat urban areas extends only 10 miles east of Vallejo and 10 miles west of Sacramento, which leaves out most of Solano County.

Emlen cited a derailment and spill that took place in Virginia with a train using CPC-1232 tank cars and traveling 23 mph.

“Therefore, the use of CPC-1232 tank cars at low speeds does not alone mitigate the potential impact from a train derailment,” he said.

Other cities that submitted a written response on the revised draft included Davis, Albany, Gridley and Briggs. Other counties that responded included Yolo, Placer and Nevada counties.

An original draft EIR was issued for the project in June 2014. Benicia said it issued the revised draft EIR in response to requests made in that original report. The city released the revised document Aug. 31 for a 45-day review period. It later extended the deadline for submitting written comments from Oct. 16 to Oct. 30.

The Benicia Planning Commission also gathered public input on the revised document at a Sept. 29 meeting.

The Valero project involves the installation of a new railcar unloading rack, rail track spurs, pumps, pipeline and associated infrastructure at the refinery, according to a city report. The crude would originate at sites in North America.

Union Pacific Railroad would transport it using existing rail lines to Roseville, and from there to the refinery, the city said.