Tag Archives: Rail inspection

Sen. Bob Casey calls for more funding for railroad bridges

Repost from The Herald, Sharon PA

Casey calls for more funding for railroad bridges

By John Finnerty, CNHI Harrisburg, August 7, 2015 7:38 am

HARRISBURG – The federal government must step up oversight of railroad bridges as hundreds of trains carrying explosive crude oil from the Bakken region of North Dakota cross the state each week, said U.S. Sen. Bob Casey.

Casey, a Democrat and the state’s senior senator, has repeatedly criticized the government’s regulation of railroads in light of derailments and explosions involving crude oil.

Pennsylvania has more than 900 bridges that carry trains over highways, Casey said. The Federal Railroad Administration has just one inspector to check those bridges.

Under a 2010 Federal Railroad Administration rule, railroads must check each bridge at least once a year. At the time that rule was adopted, the government estimated there were 100,000 railroad bridges in the United States.

Railroads face fines of $100,000 for failing to comply with inspection rules.

But short-staffing at the railroad administration means the agency is in no position to ensure that railroads comply, Casey said.

“This lack of oversight could cause gaps in our rail safety system and creates an environment where hundreds of unsafe bridges could be in daily use without proper federal oversight,” he said in a written statement. “It’s time to put more cops on the beat by hiring more rail inspectors. With the risks that our communities face only increasing, the FRA needs to put this process into overdrive.”

Before the Bakken region’s tracking boom, railroads carried about 9,500 cars of crude oil a year. This year they’re on track to top a half-million, according to the American Association of Railroads.

That includes trains that carry at least 60 to 70 million gallons of crude oil across Pennsylvania each week.

To boost the safety of moving oil by rail, focus on the tracks, paper argues

Repost from the Houston Chronicle

To boost the safety of moving oil by rail, focus on the tracks, paper argues

Infrastructure report says broken rails and human error are also problems as shipments of crude increase

By Jennifer A. Dlouhy, August 6, 2015
A train hauls crude oil in Seattle last month. Railroads and regulators can leverage technology to make existing inspection programs more efficient and effective, says a white paper by the Alliance for Innovation and Infrastructure.on Wednesday, July 15, 2015. The highly controversial trains haul rail cars loaded with oil brought from the oil fields of North Dakota and Montana. (Joshua Trujillo, seattlepi.com) Photo: JOSHUA TRUJILLO / SEATTLEPI.COM
A train hauls crude oil in Seattle last month. Railroads and regulators can leverage technology to make existing inspection programs more efficient and effective, says a white paper by the Alliance for Innovation and Infrastructure.on Wednesday, July 15, 2015. The highly controversial trains haul rail cars loaded with oil brought from the oil fields of North Dakota and Montana. (Joshua Trujillo, seattlepi.com) Photo: JOSHUA TRUJILLO / SEATTLEPI.COM

WASHINGTON – More can be done to boost the safety of moving oil by rail by focusing on the tracks themselves, according to a white paper released Thursday by a group promoting infrastructure investments.

New rules requiring more resilient tank cars are an important step, the Alliance for Innovation and Infrastructure said, but regulators, railroads and shippers now need to do more to combat the leading cause of derailments, including broken rails and human error.

From integrity sensors to measurement systems, an array of technologies can help ensure tracks are sound, said Brigham McCown, chairman of the alliance and a former head of the Pipeline and Hazardous Materials Safety Administration.

‘Proactive engagement’

“We tend to be reactionary. Something happened, so what are we going to do to fix it?” McCown told reporters Thursday. “We focus on the accident, rather than focusing on a long-term proactive engagement of reducing the potential for accidents to begin with.”

The issue has drawn attention amid a surge in oil-by-rail traffic. As trains carry crude across the United States to refineries and ports, there has also been a series of fiery derailments involving tank cars carrying that hazardous material.

Over 22 pages, the alliance’s white paper makes the case that railroads and regulators can leverage technology to make existing inspection programs more efficient and effective.

Existing regulations, updated in 2014, already mandate both track and rail inspections – the former often entails workers examining the physical conditions of track structures and the roadbed by foot or by vehicle, with that monitoring required as frequently as weekly in some cases. Rail inspections use ultrasonic or induction testing to identify hidden internal defects, with their timing generally pegged to the amount of traffic on rail segments.

The Federal Railroad Administration also requires other probes, including monthly inspections of switches, turnouts, track crossings and other devices.

Constant inspections

Many railroads go above and beyond those inspection requirements.

“Freight railroads spend billions of dollars every year on maintaining and further modernizing the nation’s rail network, including safety enhancing rail infrastructure and equipment,” said Ed Greenberg, a spokesman for the Association of American Railroads. “At any point during the day or night, the nation’s rail network is being inspected, maintained or being upgraded.”

But the infrastructure alliance reiterates a previous assertion by the National Transportation Safety Board, that track inspections are undermined when a single worker can inspect multiple lines at the same time, as currently allowed.

And McCown emphasized that existing technology can boost the odds of catching broken rails and other problems before an accident.

Montana county has had 5 derailments in two years

Repost from The Dickinson Press

Montana county has had 5 derailments in two years

By Amy Dalrymple on Jul 20, 2015 at 11:22 p.m.
An investigator takes photos at the site of a crude oil train derailment on Saturday, July 18 east of Culbertson, Mont. Twenty-two oil tankers derailed, leaking an estimated 35,000 gallons of oil. (FNS Photo by Amy Dalrymple)

CULBERTSON, Mont. — Five train derailments have occurred in less than two years in the northeastern Montana County where crews continue cleaning up after last week’s oil train derailment.

In addition to the two train derailments that occurred last week within a 20-mile stretch of Roosevelt County, two railcars also derailed at Culbertson in February, according to the Federal Railroad Administration database, which is updated through April.

The cause of that incident, which did not cause injuries or release of hazardous material, was attributed to human error, according to information submitted to the FRA.

The area also had two train derailments in 2014, including the derailment of two Amtrak cars in April of that year in the neighboring community of Bainville.

Two people were hurt in the derailment, which caused more than $100,000 in damage to Amtrak equipment and nearly $500,000 in damage to the track, the FRA database shows.

The cause that derailment is listed as “track roadbed settled or soft,” according to information submitted to the FRA.

The other 2014 incident, which involved one railcar that derailed in December at Culbertson, was attributed to a broken wheel, the FRA database shows.

The entire state of Montana had 19 train derailments in 2014, the FRA information shows.

Last Tuesday, nine railcars derailed near Blair, Mont., damaging about 1 mile of track. The cause remains under investigation.

BNSF Railway inspects the track in that area at least four times per week, spokesman Matt Jones said.

The FRA and the Pipeline and Hazardous Materials Safety Administration continued collecting evidence Monday to investigate the cause of Thursday’s derailment involving 22 oil tankers. Four of the derailed tank cars leaked oil, the FRA said, and spilled an estimated 35,000 gallons of oil.

The train was not speeding at the time it derailed, an FRA spokesman said. It was traveling 44 miles per hour in a 45-mph zone, the spokesman said.

BNSF environmental specialists continue to clean up at the site. Oil will be removed from the remaining tank cars in the next several days, and the cars will be removed after that, Jones said.

Crews are excavating contaminated soil, said Daniel Kenney, enforcement specialist with the Montana Department of Environmental Quality, which is monitoring the cleanup. The spill was not reported to have contaminated any water sources and has not threatened human health, Kenney said.

The North Dakota Department of Mineral Resources confirmed Monday that Statoil, the company that owns the oil that was on the train, is in compliance with the state’s oil conditioning order.

The order, which took effect in April, aims to reduce the volatility of Bakken crude oil.

Statoil was meeting the order by operating its equipment at specific temperatures and pressures, said Department of Mineral Resources spokeswoman Alison Ritter. Companies also can comply by submitting vapor pressure tests to the state.

The train with was loaded by Savage Services in Trenton, N.D., and headed to Anacortes, Wash., the FRA said.

Jeff Hymas, a spokesman for Savage Services, said Monday the railcar inspection protocols at the Trenton terminal are consistent with FRA and BNSF requirements.

Senator: Using bad tank cars? Then pay a fee

Repost from The Columbus Dispatch

Using bad tank cars? Then pay a fee, Brown proposes

By Rick Rouan, June 30, 2015 11:36 PM

Sen. Sherrod Brown wants shippers using tank cars that have been linked to fiery train derailments to pay fees that would be used to reroute train tracks, train first responders and clean up spills.

Brown has proposed fees that start at $175 per car for those using the DOT-11 [sic], a tank car that federal regulators have warned hazardous-material shippers against using.

The fees would pay to clean up hazardous-material spills, to move tracks that handle large volumes of hazardous material and to hire more railroad inspectors. Brown’s bill earmarks about $45 million over three years to train first responders near rail lines that carry large quantities of hazardous material.

Earlier this year, federal regulators tightened rules on newly manufactured tank cars but did not require shippers to immediately remove the old cars.

“(The rule) probably didn’t go far enough,” Brown said on Tuesday at the site of a 2012 derailment and explosion near the state fairgrounds. “If it’s a threat to public safety, they probably need to be off the rails.”

The federal rule will phase out or require retrofitting of thousands of the oldest tank cars that carry crude oil by 2018. Another wave of the oil-carrying tankers would have to change by 2020.

Some of the tank cars that aren’t carrying crude oil would not be replaced or retrofitted until 2025.

Brown’s proposal calls for a tax credit for companies that upgrade their tank cars to the new federal standard in the next three years.

Chet Thompson, president of the American Fuel & Petrochemical Manufacturers trade association, said his organization would oppose the fee structure Brown proposed.

“We think the federal focus should be on the rail carriers and their efforts to improve track integrity,” he said. “We want to see legislation that beefs up track integrity to keep the trains on the track.”

A spokesman for the American Association of Railroads declined to comment on Brown’s proposal. The organization is appealing the new federal standard, arguing that it doesn’t do enough to require shippers to stop using the DOT-111 tank cars and should require more heat protection on the cars, spokesman Ed Greenberg said.

The cars have been involved in several fiery derailments while carrying crude oil from the Bakken shale formation in North Dakota to East Coast refineries. In July 2013, a runaway train killed 47 people and destroyed the business district in Lac-Megantic, Quebec.

And in February, a train carrying volatile Bakken crude derailed in Mount Carbon, W.Va., after it likely traveled through Columbus. The train was run by CSX, which has three tracks that carry crude oil converging in Columbus before they head toward West Virginia.

On July 11, 2012, a Norfolk Southern train slipped the rails just north of Downtown. One of the cars punctured, spilling ethanol and causing an explosion and fire. Two people were injured and about 100 people were evacuated.

The National Transportation Safety Board said a broken track caused the derailment.

“Unfortunately, that was not an isolated incident,” Brown said.

A recent analysis for Franklin County Emergency Management and Homeland Security found that crude oil represents the largest share of hazardous material transported by rail through the region, Director Mike Pannell said.

Earlier this year, the state released reports showing that 45 million to 137 million gallons of Bakken crude travel through the state each week.

Local first responders have procedures in place to handle derailments but not specific plans for every piece of track, including lines that run through residential areas, said Karry Ellis, an assistant chief in the Columbus Fire Division.

Brown’s proposal calls for the U.S. Department of Transportation to study whether first responders are prepared for flammable-liquid spills and whether longer freight trains pose a greater risk.

Information from the Associated Press was included in this story.