Tag Archives: U.S. Department of Transportation (DOT)

McClatchy investigative reports result in enforcement actions

Repost from McClatchy DC and The Bellingham Herald
[Editor:  McClatchy News investigative reports have alerted Washington State and federal officials, and resulted in fines and enforcement actions.  For background, see Washington state officials unaware at first of November oil spill (1/26); Officials say oil train leaked as it crossed Washington state (2/6); and Oil-loading facility sanctioned in Washington rail car spill (3/12).  Don’t miss the excellent video near the end of this story.  – RS]

More oil-train fixes: Feds order defective valves replaced on leaking cars

By Samantha Wohlfeil and Curtis Tate, March 13, 2015 
APTOPIX Train Derailment
Derailed oil tanker train cars burn near Mount Carbon, W.Va., Monday, Feb. 16, 2015. A CSX train carrying more than 100 tankers of crude oil derailed in a snowstorm, sending a fireball into the sky and threatening the water supply of nearby residents, authorities and residents said Tuesday. MARCUS CONSTANTINO — AP

WASHINGTON — The Federal Railroad Administration on Friday ordered rail tank car owners to replace defective valves never approved for installation on thousands of tank cars, causing oil to spill from moving trains.

The directive applies to a 3-inch valve installed on roughly 6,000 tank cars, and their owners have 60 days to replace them. Within 90 days, tank car owners must also replace 37,000 1-inch and 2-inch valves manufactured by the same company. While the smaller valves were not found to be defective like the larger ones, they were not approved for the tank cars.

The affected cars can be used in the interim, but none can be loaded with hazardous materials if they are still equipped with those valves after the deadlines.

The enforcement action comes after a story last month in McClatchy’s Bellingham Herald about 14 tank cars that were discovered leaking en route from North Dakota’s Bakken region to the Tesoro refinery in Anacortes, Wash.

Friday’s enforcement action is the second to follow an investigation launched after McClatchy reported on leaking cars in Washington.

On Thursday, the agency said it had sanctioned the operator of a North Dakota loading facility for not properly closing a valve on another oil car after McClatchy reported in January that the car arrived at the BP Cherry Point refinery in northwest Washington state with 1,600 gallons missing.

That spill was discovered in early November but wasn’t reported to state officials until early December. Local emergency officials were never notified, according to a report sent by BNSF Railway to the U.S. Department of Transportation and the Washington state Utilities and Transportation Commission.

The 1-inch, 2-inch and 3-inch valves were all manufactured and sold by McKenzie Valve and Machining, a company in Tennessee. The Bellingham Herald could not immediately reach anyone at McKenzie, but left messages with the company Friday.

The Federal Railroad Administration also announced Friday that it was launching a full audit of the approval process for tank car components to determine why the unapproved valves were installed.

Under federal regulations, tank car valve designs must be approved by the Association of American Railroads Tank Car Committee.

The Federal Railroad Administration said it would begin working immediately with the association, which is the rail industry’s principal trade group in the nation’s capital.

Sarah Feinberg, the FRA’s acting chief, said Friday that removal of the valves will help reduce the number of non-derailment releases of hazardous materials.

“Any type of hazardous materials release, no matter how small, is completely unacceptable,” she said in a statement.

Ed Greenberg, a spokesman for the railroad association, said Friday that it supported the order. Railroads don’t own most of the tank cars used to transport oil.

“Officials from our association will be working closely with the administration in reviewing the tank car valve approval process to ensure the agency is fully satisfied with the current approval requirements that are in place,” he said in a statement.

The Federal Railroad Administration’s order came about a month after crews discovered tank cars leaking oil from their top fittings on a handful of trains hauling different types of crude oil through Washington state.

In mid-January, a train loaded with Bakken crude needed to have more than a dozen leaking cars removed at three separate stops as it traveled through Idaho and crossed Washington state.

The train was headed from Tioga, N.D., to the Tesoro refinery in Anacortes.

In a report to the U.S. Department of Transportation, BNSF reported a total of 26 gallons of oil leaking from 14 cars. Tesoro reported two more leaking cars. The oil was found only on the tops and sides of tank cars, and no oil was found on the ground.

Crews had first noticed oil on the side of a tank car while the train was in northern Idaho, and after checking the rest of the train, removed that car, which had leaked about two gallons, according to BNSF spokeswoman Courtney Wallace.

After the train had crossed through the state, following the Columbia River to Vancouver, Wash., crews found that crude oil had leaked onto the top of seven more cars, which were removed from the train on Jan. 12. BNSF reported the incident to the state Department of Ecology on Jan. 23.

BNSF also reported that about 10 gallons total had leaked from six more cars removed in Auburn on Jan. 13.

Wallace said the railroad would work with customers and shippers to take the required actions.

“Although BNSF does not own the tank cars, nothing is more important to us than safely operating through the communities that we serve,” she said in a statement.


The state Utilities and Transportation Commission and the FRA investigated the cars that were pulled from the train in Vancouver, which led to the discovery that closure plugs on the valves caused damage to the valve’s seal, and when tightened, would press down on and damage the ball.

The cars involved were CPC-1232 model cars built after 2011, which some oil companies have started using after several fiery derailments caused concerns about older DOT-111 rail cars, which have been found more likely to puncture or burst.

However, newer CPC-1232-standard cars that lack features that reduce damage from punctures and fire exposure have performed no better in four recent oil train derailments in West Virginia, Illinois and Ontario.

The White House Office of Management and budget is reviewing a new tank car standard proposed by the Department of Transportation. It is scheduled for publication on May 12.

Wohlfeil, of The Bellingham Herald, reported from Washington state. Tate reported from Washington, D.C.

As Galena IL Tank Cars Burned, Industry Met at White House to Weaken Safety Standards

Repost from Reuters

U.S. rail industry pushes White House to ease oil train safety rules

By Valerie Volcovici & Patrick Rucker, Mar 10, 2015 2:24pm EDT

(Reuters) – The U.S. rail industry is pushing the White House to drop a requirement that oil trains adopt an advanced braking system, a cornerstone of a national safety plan that will soon govern shipments of crude oil across the country.

Representatives of large rail operators met with White House officials last week to argue against the need for electronically controlled pneumatic brakes, or ECP brakes, saying they “would not have significant safety benefits” and “would be extremely costly,” according to a handout from the meeting.

ECP brakes trigger all axles simultaneously rather than one at a time in current design.

More than a dozen industry representatives made their case at the Washington meeting last Friday, a day after a crude oil train derailed in Illinois.

Reuters reported last month that the national oil train safety plan now under review at the White House Office of Management and Budget would require the advanced braking.

The Transportation Department has concluded that ECP braking would deliver meaningful safety improvements but the industry officials argued that the department estimates “grossly overstate benefits and understate costs.”

The industry claims fitting rail stock with ECP brakes would not prevent accidents, but merely limit the number of cars that derail in an accident.

Adopting the new technology would lead to more frequent service problems and mechanical delays, industry officials said.

The oil train safety plan being considered by the White House would also demand tougher tank cars and other safety steps that the government estimates would cost at least $3 billion over the next 20 years.

Oil and rail executives contend that much higher costs would needlessly hinder a sector that has helped push a national energy renaissance.

NEW YORK TIMES: Dangerous Trains, Aging Rails

Repost from The New York Times
[Editor:  Another excellent investigative report by Marcus Stern.  New information here – another must-read for CBR opponents.  See his highly-acclaimed December report, Boom! North America’s Explosive Oil-by-Rail Problem.  – RS]

Dangerous Trains, Aging Rails

By Marcus Stern, March 12, 2015

A CSX freight train ran off the rails last month in rural Mount Carbon, W.Va. One after another, exploding rail cars sent hellish fireballs hundreds of feet into the clear winter sky. Gov. Earl Ray Tomblin declared a state of emergency, and the fires burned for several days.

The Feb. 16 accident was one of a series of recent fiery derailments highlighting the danger of using freight trains to ship crude oil from wellheads in North Dakota to refineries in congested regions along America’s coastlines. The most recent was last week, when a Burlington Northern Santa Fe oil train with roughly 100 cars derailed, causing at least two cars, each with about 30,000 gallons of crude oil, to explode, burn and leak near the Mississippi River, south of Galena, Ill.

These explosions have generally been attributed to the design of the rail cars — they’re notoriously puncture-prone — and the volatility of the oil; it tends to blow up. Less attention has been paid to questions surrounding the safety and regulation of the nation’s aging network of 140,000 miles of freight rails, which carry their explosive cargo through urban corridors, sensitive ecological zones and populous suburbs.

Case in point: The wooden trestles that flank the Mobile and Ohio railroad bridge, built in 1898, as it traverses Alabama’s Black Warrior River between the cities of Northport and Tuscaloosa. Oil trains rumble roughly 40 feet aloft, while joggers and baby strollers pass underneath. One of the trestles runs past the Tuscaloosa Amphitheater. Yet when I visited last May, many of the trestles’ supports were rotted and some of its cross braces were dangling or missing.

The public has only one hope of finding out if such centenarian bridges are still sturdy enough to carry these oil trains. Ask the railroads. That’s because the federal government doesn’t routinely inspect rail bridges. In fact, the government lacks any engineering standards whatsoever for rail bridges. Nor does it have an inventory of them.

The only significant government intrusion into the railroads’ self-regulation of the nation’s 70,000 to 100,000 railroad bridges is a requirement that the companies inspect them each year. But the Federal Railroad Administration, which employed only 76 track inspectors as of last year, does not routinely review the inspection reports and allows each railroad to decide for itself whether or not to make repairs.

The railroad that operates the Tuscaloosa bridge, Watco Companies, and the Federal Railroad Administration assured me it was safe. But shortly after my reporting was published on the websites of InsideClimate News and The Weather Channel, Watco announced that it would make $2.5 million in repairs. And the Department of Transportation’s inspector general said it would begin a review of the F.R.A.’s oversight of rail bridges.

Even where federal engineering standards do exist, it’s unclear how much safety they provide. For instance, federal track safety standards allow 19 out of 24 crossties to be defective along any 39-foot stretch of the lowest grade of track, where the speed limit is 10 m.p.h. These crossties stabilize the rails. On the best of tracks, which have a speed limit of 80 m.p.h., the standards allow half of the crossties to be decayed or missing.

Five oil trains have exploded in the United States in the last 16 months. Miraculously, there have been no deaths. Canada, however, hasn’t been so lucky. In July 2013, an oil train carrying North Dakota oil burst into flames in the Quebec town of Lac-Mégantic, about 10 miles from the Maine border, killing 47 people.

After that accident, federal officials promised to develop sweeping new regulations to make sure nothing like it happens in the United States. In the interim, the Department of Transportation issued an emergency order requiring railroads to get federal permission before leaving trains unattended with their engines running, a major factor in the Lac-Mégantic explosion. And the railroads agreed to a number of voluntary steps, including keeping oil trains under 50 m.p.h.

But more than a year and a half after Lac-Mégantic, new regulations have yet to be finalized as the railroad and oil industries argue about various proposed provisions. The emergency order didn’t end the practice of railroads’ leaving oil trains on tracks with their engines running; it simply required companies to have a written plan for doing so. And without regulations, reporting or penalties, the public has only the railroads’ word they are complying with the 50 m.p.h. speed limit.

For trackside communities, the stakes are obviously high. New hydraulic fracturing technology has allowed oil developers to tap vast amounts of deeply buried oil in parts of North Dakota, Montana and Canada. Without significant new pipeline capacity, the only way to get the oil to refineries is by train. Rail car shipments of crude oil rose from 9,500 in 2008 to more than 400,000 last year.

To protect communities and the environment, the Transportation Department needs to act quickly to require more resilient rail cars, improve the safety of rail infrastructure and operations, and reduce the volatility of oil at the wellhead, before it is loaded onto trains.

Instead, the debate over regulations inches along as oil trains continue to roll through downtown Philadelphia, suburban Chicago and along the Hudson River in New York and the Schuylkill in eastern Pennsylvania, passing close to a nuclear power plant.

Before leaving office last year, Deborah A. P. Hersman, the chairwoman of the National Transportation Safety Board, questioned whether industry representatives and regulators had a tombstone mentality when it came to oil trains. If nobody dies, she suggested, there’s no pressure to act. So far, the tombstones have all been in Canada.

Marcus Stern has examined the hazards of shipping oil by rail for InsideClimate News, the Weather Channel and the Investigative Fund. He reports for a San Diego-based writers group, Hashtag30.

Philadelphia Council calls for speedy tank car replacement

Repost from The Philadelphia Inquirer
[Editor: See similar coverage at Newsworks.org.  – RS]

City Council wants tighter oil train rules

Andrew Maykuth, March 13, 2015, 1:08 AM
Recent oil train derailments have increased pressure on the federal government to improve safety standards. (REUTERS/Rick Wilking)
Recent oil train derailments have increased pressure on the federal government to improve safety standards. (REUTERS/Rick Wilking)

Philadelphia City Council on Thursday urged the federal government to tighten regulations on trains carrying crude oil, in the aftermath of a series of fiery derailments.

City Council unanimously approved a resolution that calls on Washington to approve new rules for railcars. It also calls for the city to plan emergency-response workshops for communities along oil-train routes.

Philadelphia-area oil refineries have become increasingly dependent upon rail shipments of domestic crude oil, which has displaced more expensive imported oil delivered by ships.

Two major freight carriers, CSX and Norfolk Southern, now move from 45 to 80 oil trains through Philadelphia each week, according to city officials.

The U.S. Department of Transportation sets rules governing railroad safety and railcar standards, so Council’s action is symbolic.

“With the increase of train traffic in Philadelphia, we are flirting with disaster,” said Councilman Kenyatta Johnson, the resolution’s sponsor.

Environmental groups including Clean Water Action, Delaware Riverkeeper Network, and PennEnvironment have lobbied Johnson’s office to take action since a CSX oil train last year derailed on a bridge near Center City. The accident caused no leaks, but the sight of oil cars tilted over the Schuylkill drew much attention to the issue.

Last month’s accident in West Virginia – one of five in recent weeks – has inspired a surge in calls for action.

The Federal Railroad Administration and the U.S. Pipeline and Hazardous Materials Safety Administration last year issued several emergency orders and advisories to address safety issues. The government is also considering new rules to phase out old tank car designs, though several of the most recent explosive derailments involved newer-model tank cars.