Tag Archives: explosion

Martinez Environmental Group: Volatile crude by rail IS a concern

Repost from The Martinez Gazette, Letters

‘Volatile crude by rail IS a concern’

June 26, 2014

Dear Editor,

The front page headline of the June 14-15 edition of the Martinez News-Gazette read: “Crude by rail not a local threat, CAER director says.”   The article covered the recent City of Martinez Public Safety Committee, which convened to examine the Bakken crude by rail issue. The meeting was dominated by CAER director Tony Semenza, who is also principal of a consulting firm that serves a number of major local refineries.

Mr. Semenza was quoted “… there is one train, with up to 100 tanker cars, that originates in Stockton every 7-10 days and ends up at the Kinder Morgan facility in Richmond, traveling via the tracks that parallel Highway 4.” In other words, this train is going right through Martinez! It rolls over the (rusty) Alhambra trestle carrying 3,000,000 gallons of Bakken crude, the same oil that has been exploding all over North America and that killed 47 people in Lac-Megantic, Quebec.  According to maps recently released by the Natural Resources Defense Council, an explosion by an oil train on that track would threaten thousands of Martinez residents and endanger five schools located within the zone of impact.

Minimizing the issue by only focusing on the one present train ignores recent trends and projections for the near future. Only one train now. There were none this time last year.  Next year, if the refineries have their way, there very well could be a drastic increase of oil train traffic through our town. Nationally, crude oil train traffic is skyrocketing, from 9,500 carloads in U.S. in 2008 to 434,000 in 2013.  California crude-by-rail rose an incredible 506 percent just from 2012 to 2013, with a further 24-fold increase expected by 2016. Accidents have also increased across the country.

Just in the past 11 months, there have been nine major derailments of oil trains, involving explosions, evacuations and spills. These trains spilled over a million gallons of crude oil, more than spilled by railroads in the past 37 years combined. And with crude-by-rail projects pending all around Martinez in Benicia, Pittsburg, Rodeo and Santa Maria, we will  see more than just one train every 7-10 days. So, let’s not minimize the risk. Volatile crude by rail IS something we need to be concerned about here in Martinez.

The disappointing part of the Martinez Public Safety Committee meeting was the decision by Mike Menesini and Anamarie Avila Farias to not immediately elevate the issue to the full City Council, despite the current threat to our health and safety. If you live anywhere near the tracks, check out www.mrtenvgrp.com for more information, and write or call your city council to ask them to do something meaningful on this issue quickly. Other Bay Area cities have passed resolutions opposing the passage of crude by rail. Martinez needs to do the same.

Signed,

Martinez Environmental Group Members Aimee Durfee, Tom Griffith, Bill Nichols, Jim Neu, Kathy Petricca, Guy Cooper, Nancy Peacock, Karen & Arnie Wadler

Canada Announces Rules for Transporting Dangerous Goods by Rail

Repost from The Wall Street Journal

New Measures Mandate Tank Cars That Carry Crude Oil to Be Built with Thicker Steel Walls

By David George-Cosh, June 27, 2014

TORONTO—Canadian Transport Minister Lisa Raitt announced new rules Friday aimed at bolstering safety measures for transporting dangerous goods, such as crude oil, over the country’s railway networks.

The new measures include updating safety-reporting requirements for rail companies operating in Canada, mandating tank cars that carry volatile crude be built with thicker steel walls, and improving data-reporting requirements for railways.

Canadian and U.S. regulators have urged the rail industry to improve safety measures after several recent accidents involving trains carrying crude, including last year’s derailment of a crude-carrying train in rural Quebec in July, which killed 47 people.

“Our government is committed to railway safety and the safe movement of dangerous goods,” Ms. Raitt said in a statement. “The upcoming regulations will further strengthen safety in Canada’s already robust transportation system.”

A spokesman for Canadian Pacific Railway Ltd.  said the company was reviewing the announcement and that it has a “strong” set of existing safety measures it discloses to the federal government.

Jim Feeny, a spokesman from Canadian National Railway Co. said that its position on safety disclosure “largely aligns” with the federal government’s proposals, but it was also reviewing the announced measures.

The new rules announced Friday will include amendments to legislation to require DOT-111 tank cars to abide by new standards such as thicker steel walls and better top protection to reduce spills in a derailment.

The ministry will also require the country’s short-line railroads to upgrade their safety-management disclosure by providing Transport Canada with the same reports on safety risks that the country’s major rails provide. The proposal affects 35 railways in Canada, Transport Canada said.

Transport Canada is also requesting that Canada-based railroads provide measurable data such as maintenance and repair records to the federal government that could better address safety risks before they occur.

Friday’s measures follow a series of steps Ms. Raitt announced in April to improve rail transport in response to recommendations made by the Transportation Safety Board of Canada after its investigation of last year’s Lac-Mégantic tragedy.

The federal government also ordered older DOT-111 tank cars to be phased out or retrofitted in three years, and added a requirement that all crude oil shipments include emergency response plans.

It is unclear how many DOT-111 cars operate in Canada, but the Association of American Railroads and the American Short Line and Regional Railroad Association says that there are 228,000 general-purpose tank cars in service in the U.S. known as DOT-111s.

The U.S. has adopted tougher classification standards for shipping crude-by-rail that but hasn’t curbed the use of older DOT-111 tank cars on the country’s tracks despite last year’s deadly accident in Quebec and more recently, a fiery derailment in Lynchberg, Va.

Safety board chairman says oil train dangers extend beyond crude from the Bakken

Repost from The Associated Press

APNewsBreak: Oil train dangers extend past Bakken

By Matthew Brown, Associated Press, Jun 26, 2014
AP Photo
AP Photo/Matt Brown

BILLINGS, Mont. (AP) — The dangers posed by a spike in oil shipments by rail extend beyond crude from the booming Bakken region of the Northern Plains and include oil produced elsewhere in the U.S. and Canada, U.S. safety officials and lawmakers said.

Acting National Transportation Safety Board Chairman Christopher Hart said all crude shipments are flammable and can damage the environment – not just the Bakken shipments involved in a series of fiery accidents.

Hart cited recent derailments in Mississippi, Minnesota, New Brunswick and Pennsylvania of oil shipments from Canada. He said those cases exemplify “the risks to communities and for the environment for accidents involving non-Bakken crude oil.”

Hart’s comments were contained in a letter to U.S. Sens. Ron Wyden and Jeff Merkley obtained by The Associated Press. They add to growing pressure on federal regulators to improve oil train safety in the wake of repeated derailments, including in Lac-Magentic, Quebec, where 47 people were killed in a massive conflagration last July.

Citing the highly volatile nature of Bakken oil, Transportation Secretary Anthony Foxx last month ordered railroads to notify states of shipments from the region so firefighters and first responders can better prepare for accidents.

But Wyden and Merkley told Foxx on Thursday that the order leaves emergency personnel in the dark on oil shipped from outside the Bakken region.

The Oregon Democrats urged Foxx to expand his order to cover crude from all parts of the U.S. and Canada. They also pressed for the 1 million-gallon minimum threshold in Foxx’s order to be lowered to include smaller shipments.

“With the exception of the Lac-Megantic accident, every accident involving crude oil, ethanol and other flammable materials since 2006 has resulted in a hazardous materials release of less than 1,000,000 gallons,” Wyden and Merkley wrote to Foxx in a letter.

They said the derailments cited by the transportation safety board show that trains carrying non-Bakken crude or less than 1 million gallons pose the same “imminent hazard” that Foxx has asserted for Bakken oil.

Bakken oil on average travels more than 1,600 miles to reach its destination, transportation officials said. That’s much further than oil from some other parts of the country.

U.S. transportation officials said the lengthier journey increases the overall risk exposure for Bakken oil – and is one reason it’s being treated differently than other hazardous cargos.

Representatives of the oil industry and officials in North Dakota also have complained about Bakken oil being singled out by regulators – although for opposite reasons. The American Petroleum Institute and American Fuel and Petrochemical Manufacturers have argued Bakken oil is no more volatile than other light, sweet crudes.

The concerns aired Thursday by the NTSB and Oregon senators essentially flip that argument on its head, to say different types of crude and other hazardous liquids such as ethanol also pose a significant safety risk.

“Accidents involving crude oil or flammable liquids of any kind, especially when these liquids are transported in large volumes, such as in unit trains or blocks of tank cars, can have disastrous consequences,” Hart said.

Association of American Railroads spokeswoman Holly Arthur said the rail industry is complying with Foxx’s original order. She said the group would have to see the specifics of any proposed changes before commenting further.

About 700,000 barrels of oil a day – enough to fill 10 “unit trains” of 100 tank cars each – is coming out of the Bakken by rail, according to the North Dakota Pipeline Authority. That’s about 70 percent of crude-by-rail shipments nationwide, according to federal officials.

Yet the same hydraulic fracturing – or “fracking” – technology that has helped drive the boom in the Bakken region during the past decade is being employed on shale oil fields elsewhere. Crude from the tar sands of western Canada is also fueling the surge in North American production.

Charles Drevna, president of American Fuel and Petrochemical Manufacturers, said he supports getting more information on oil trains to first responders so they’re ready for potential accidents.

According to an analysis done for the U.S. State Department, more than half the loading capacity of oil train facilities built in recent years is in parts of the U.S. and Canada outside the Bakken region. That includes loading terminals in Colorado, Ohio, Oklahoma, Texas, Wyoming, New Mexico, Utah and parts of western Canada.

NTSB and AAR – even the upgraded DOT-111 tank cars are unsafe

Repost from Bloomberg BNA
[Editor: This 7-page PDF report is already a bit dated – March, 2014 – but it is an excellent overview of still-current debate over tank car adequacy and redesign standards.  The article quotes officials of the National Transportation Safety Board AND the Association of American Railroads to the effect that even the upgraded DOT-111 cars are not safe, and will require improvements.  – RS]

BloombergBNA

Tank Car Design Debate Split Over Safety of Voluntary Industry Standard

By Patrick Ambrosio, March 18, 2014

Industry groups, members of Congress and the National Transportation Safety Board are pushing the Transportation Department to quickly establish new safety design standards for rail tank cars used to carry crude oil, but there is disagreement over how stringent the new safety requirements should be.

There is now a consensus that a new federal design standard is needed to provide certainty to the industry and improve the safety of transporting flammable liquids by rail, but groups are split over whether the new standards should go beyond the Association of American Railroads’ CPC-1232 standard, a voluntary industry standard adopted for all new tank cars ordered after Oct. 1, 2011.

The Pipeline and Hazardous Materials Safety Administration, in conjunction with the Federal Railroad Administration, is working on a proposed rule that would update federal design standards for tank cars, commonly known as DOT-111 cars, that are used to carry crude oil, ethanol and other flammable liquids. The rulemaking is partially in response to a 2011 petition filed by the AAR, which represents major U.S. railroad companies such as CSX Transportation Inc. and BNSF Railway Co., requesting that the DOT adopt the CPC-1232 standard as a federal design standard for new cars.

The safety features included in CPC-1232-compliant cars include thicker shells for non-jacketed tank cars, enhanced top fittings protection, reclosing pressure relief devices and half-height head shields on both ends of the tank car.

“Their continued use to ship flammable liquids poses an unacceptable risk to the public.”

Christopher Hart, NTSB

Legacy Cars Called Unsafe

The safety of DOT-111 rail tank cars has been called into question after a series of recent derailments involving trains carrying crude oil, including a July 2013 derailment in Lac-Mégantic, Quebec, that resulted in 47 fatalities. DOT-111 rail tank cars also were involved in a December 2013 derailment near Casselton, N.D., which resulted in the release of more than 400,000 gallons of crude oil, a significant fire and the evacuation of nearby residents.

The AAR estimates that there are about 92,000 DOT-111 rail tank cars in service carrying crude oil, ethanol and other flammable liquids. Of those, about 78,000 are “legacy” cars that do not meet the CPC-1232 standard.

Following the Lac-Mégantic incident, the National Transportation Safety Board reiterated a series of recommendations made to PHMSA after a 2009 derailment involving DOT-111 tank cars in Cherry Valley, Ill. Those recommendations included requirements that all new and existing tank cars used to transport crude oil and ethanol be equipped with enhanced tank head and shell puncture resistance systems, top fittings protection that exceed current requirements and bottom outlet valves designed to remain closed during accidents (37 CRR 1409, 12/16/13).

Christopher Hart, vice chairman of the NTSB, told the Senate Commerce, Science and Transportation Subcommittee on Surface Transportation and Merchant Marine Infrastructure March 6 that the NTSB has warned the DOT since 1991 that older DOT-111 rail tank cars are too easily damaged, even when involved in low-speed crashes and derailments.

“Their continued use to ship flammable liquids poses an unacceptable risk to the public,” Hart said.

Hart said the NTSB thinks the CPC-1232 design standard needs additional changes to improve the “crash worthiness” of tank cars used to carry crude oil and flammable liquids. He cited enhanced head shields and tank jackets and increased tank shell thickness as features that the NTSB recommends.

Rail Industry Reverses Course

Edward Hamberger, president and chief executive officer of the AAR, said at the same Senate subcommittee hearing that since filing its 2011 petition the association has changed its position and now recommends that the DOT require new tank cars to be built to meet specifications exceeding the CPC-1232 standard.

Hamberger said that although the AAR thinks that the CPC-1232 standard is a “big step above” the legacy DOT-111 cars, the railroads now think safety needs to “go beyond” the voluntary industry standard.

The AAR is recommending that the federal tank car standards adopt the following safety design features that exceed those found in the CPC-1232 standard:

  • a high-capacity pressure relief valve to protect the tank car from an increase in internal pressure resulting from a fire;
  • a minimum 9/16-inch-thick steel tank;
  • a 1/2-inch-thick full-height head shield on both ends of the tank car;
  • a bottom outlet handle that will not inadvertently open the bottom outlet in the event of a derailment; and
  • an 1/8-inch-thick steel jacket around the tank car, with thermal protection.

The AAR recommendations also are supported by the American Short Line and Regional Railroad Association, which represents the interests of about 450 short line and regional railroad companies in the U.S.

$7 Billion Already Invested

The AAR estimates that its proposal would require the phase-out or retrofit of about 78,000 legacy cars and the retrofit of about 14,000 cars built since 2011 that meet the CPC-1232 standard.

The Railway Supply Institute, which represents manufacturers, distributors and service providers for the freight and passenger rail industries, estimates that as of December 2013, the crude oil and ethanol sector has invested more than $7 billion to build new tank cars to meet the CPC-1232 standard since the standard was adopted in 2011. Thomas Simpson, president of the RSI, told Bloomberg BNA that an estimated 55,000 new tank cars built to meet the CPC-1232 standard will be in crude oil and ethanol service by the end of 2015.

Prentiss Searles, marketing issues manager at the American Petroleum Institute, told the Senate Commerce, Science and Transportation Subcommittee on Surface Transportation and Merchant Marine Infrastructure that the petroleum industry believes that CPC-1232-compliant tank cars will be sufficient to safely move crude oil and other hazardous liquids.

Searles said a multi-industry committee reviewed available data for three years to determine whether the CPC-1232 standard would be sufficient to carry crude oil.

“Those are safe cars,” Searles said.

Vulnerabilities Addressed

Brigham McCown, managing director of the consulting group Nouveau Inc., told Bloomberg BNA that the government and industry should be looking at the improved DOT-111 rail tank cars manufactured after 2011 to improve rail car safety. McCown formerly served as the first acting administrator and interim CEO of PHMSA.

McCown said the CPC-1232 standard addresses the three major vulnerabilities of the legacy DOT-111 rail tank cars.

He said rail tank cars commonly “flip over” on their sides during derailments, and older DOT-111 tank cars have a propensity to break open during such accidents. He also said that bulkheads on the end of older DOT-111 cars can easily be dented and either break or rupture, and that the valves on older DOT-111 cars can break off if they are not adequately protected, resulting in a release of flammable liquid.

Retrofit Issues

Searles said the API has requested that PHMSA and the FRA lead a task force to review the challenges associated with retrofitting existing DOT-111 cars to include additional safety features.

API, when asked for additional information on the challenge of retrofitting existing DOT-111 rail cars, directed Bloomberg BNA to comments filed with PHMSA in December 2013 on the rail tank car design issue.

The comments raised several concerns associated with a retrofit program, including the difficulty of applying 1/2-inch-thick head shields to non-jacketed tank cars. API said the additional weight could compromise the structure of the car because it would be impossible to measure the existing fatigue on tank cars that have already been in service.

Installing a head shield onto a non-jacketed car also could require existing equipment, including brake wheels and end platforms, to be rearranged on the car before the head shield is welded to the tank for support, which could potentially affect the interior coating of the tank, API said.

Simpson of the RSI told Bloomberg BNA that there are feasible modifications that can be made to legacy DOT-111 cars to get them “close” to the CPC-1232 standard, including removing the handle on the bottom outlet valve to prevent it from opening during a crash and installing a half-height head shield. Simpson noted that adding a 1/8-inch-thick steel jacket to a legacy car is “more problematic,” and said companies are looking at whether that is feasible.

Evolution of Rail Industry Tank Car Standards for Crude Oil

Limited Repair Capacity

API also said the nation’s repair shop network is incapable of handling the large number of existing tank cars that would need to be upgraded if retrofits were required.

“The repair shop network that exists today, even if it were to be increased by a third, could not handle all of the work in a reasonably timely manner,” API said.

API added that most repair facilities are not even capable of completing major retrofits to older tank cars, such as adding jackets to legacy cars or installing top fittings protection.

Simpson said the RSI has suggested that PHMSA give the industry a 10-year timeframe to modify the legacy fleet to meet any upgraded safety design standards.

Simpson said the RSI does support expanding design requirements for all new tank cars intended for crude oil and ethanol service to include full-height head shields and thermal protection and would support the prioritization of retrofitting legacy tank cars over cars that comply with the CPC-1232 industry design standard.

The RSI suggested that PHMSA freeze the current fleet of DOT-111 rail tank cars and not allow any additional legacy tank cars to be assigned to crude oil or ethanol service. Simpson said that under that

proposal, any tank car needed to handle an increase in crude traffic or to replace a non-operational car would at least have to be compliant with the CPC-1232 standard.

Manufacturer Offers Retrofit Packages

The Greenbrier Companies, an Oregon-based supplier of equipment and services to the rail industry, announced in February that it will begin offering retrofits for both legacy DOT-111 tank cars and newer tank cars that were built to meet the current CPC-1232 standard.

The company will retrofit legacy tank cars with high-flow pressure relief valves, head shields, top fittings protection and thermal protection. Greenbrier also will install high-flow pressure relief valves and improved bottom outlet valve handles on any CPC-1232 cars that were not originally built with those features.

Greenbrier announced that it will design a next-generation tank car for use in transporting crude oil and ethanol that will be designed to “better withstand” the demands of carrying flammable liquids on a unit train. The company did not offer specifications for the new tank car, but said the car will address safety concerns about the older DOT-111 tank cars.

A Greenbrier representative said the company anticipates that the design of the retrofitted DOT-111 tank cars and the next-generation tank car will comply with all pending regulatory standards.

Proposal Expected in 2014

PHMSA Administrator Cynthia Quarterman said in March that she is “hopeful” that a proposed rule on rail tank car design standards will be released for public comment by the end of 2014.

Quarterman said PHMSA and FRA staffs are “moving as fast as we possibly can” to draft the rule, but noted the importance of a rulemaking that would establish a standard that could be in effect for decades.

“We really need to get this right,” Quarterman said.

Sen. John Hoeven (R-N.D.) told Bloomberg BNA in early March that he has been informed that the proposed rule will be submitted to the White House Office of Management and Budget “soon,” possibly sometime in early April. That would allow the proposed rule to be released to the public in 2014, probably in November, according to Hoeven.

Hoeven said the estimated time frame from DOT would allow for the publication of a final rule establishing tank car design standards sometime after January 1, 2015.

Push for Faster Action

Although the industry is split on whether the DOT should go beyond the CPC-1232 standard and whether legacy tank cars should be retrofitted or phased out, there is consensus that a resolution of the issue is needed to provide certainty for the industry.

Hoeven said upgrading the nation’s rail tank car fleet represents a “big investment” for the petroleum industry, which needs to make sure that it is meeting federal standards so it can transition from the legacy cars to upgraded cars.

Searles of the API said PHMSA could move forward immediately with an interim final rule on new tank car design that would provide the industry with consistency and certainty, though he added that more study is needed on retrofitting before PHMSA can issue any regulations requiring existing cars to meet more stringent design requirements.

Hamberger of the AAR suggested that PHMSA could speed up the process by splitting its tank car rulemaking in half by addressing the design standard for new tank cars first. He noted that there is currently a two-year backlog of new cars that have been ordered to meet the CPC-1232 standard, which could be deemed inadequate by the time the cars are built.

Hamberger said that there is “not a great deal of difference” between the AAR proposal and the design standards for new cars supported by other groups. The retrofit issue is more complicated because there are different kinds of DOT-111 rail tank cars, including some tank cars that are jacketed and some that are not, according to Hamberger.

Advances in Materials

Ken Grantham, executive vice president at Crompion International, said he is trying to make the crude oil tank car industry aware of advances in materials that could be used in the construction of safer tank cars. Crompion is a Louisiana-based manufacturer and distributor of specialty steel products.

Grantham said the discussion on tank car safety has only focused on design enhancements, even though much stronger metals are available than the metals currently used to construct DOT-111 rail tank cars. The NTSB recommendations and the AAR proposal for a new tank car design standard do not address the issue of using enhanced raw materials to construct rail tank cars.

The stainless steel types used to construct DOT-111 rail tank cars are older varieties of steel that have been around for 100 years or more, according to Grantham. He said there have been a “multitude of advances” in the past 20 years that have resulted in new metals that are much stronger than traditional metals and are comparable or superior in corrosion resistance.

Grantham said he would like to see newer stainless steel added to any design standard as additional materials that could be used to construct tank cars that meet DOT specifications, which would give companies the option of considering the stronger materials. He said combining the proposed enhanced safety features with the use of stronger metals would “optimize” the effort to make tank cars safer.

“We really feel that materials should be as much a part of the conversation as design improvements,” he said.

Grantham noted that Crompion is already supplying large volumes of enhanced stainless steel varieties for use in constructing rail cars used to transport coal. He said that in addition to the safety benefits of using stronger metals, the use of corrosion and abrasion resistant steel allowed for the use of thinner plates to construct those rail cars, which makes the rail car lighter and capable of transporting additional volumes of coal.

Newer generation varieties of steel also are already being used to construct static storage tanks for crude oil and other flammable liquids, according to Grantham.

BNSF Seeks Enhanced Cars

Some companies have decided to move ahead with new car orders without federal design standards.

A spokeswoman with BNSF Railway told Bloomberg BNA that the company issued a request for proposals to major railcar manufacturers seeking bids for the construction of 5,000 new rail tank cars that would be used to transport crude oil.

The design specifications described by BNSF for the new tank cars would meet the standards proposed by the AAR, including thicker tank body shells, full-height head shields, a bottom outlet valve handle that can be disengaged and a thermal protection system incorporating ceramic thermal blanketing and a pressure relief device capable of surviving an ethanol-based pool fire.

The company spokeswoman said the RFP is a “significant voluntary commitment” that will provide tank car manufacturers with a “head start” on tank car design and production while the Transportation Department continues with the formal rulemaking process.

Tesoro Corp., an independent refiner and marketer of petroleum products, has pledged that the company’s entire fleet of tank cars that are used to carry crude oil will meet the CPC-1232 design standard by the middle of 2014 (38 CRR 182, 2/10/14).

Keith Casey, senior vice president of strategy and business development at Tesoro, said in February that the company decided to be proactive in upgrading its rail tank car fleet in advance of expected regulatory changes because “it’s the right thing to do.”