Reroute oil trains? History suggests it’s a long shot
By Jim Spencer, March 21, 2015 – 8:22 PM
Industry says reinforced cars on current routes are better than trying to avoid heavily populated areas.
WASHINGTON – Last week, U.S. Sen. Al Franken asked the Federal Railroad Administration to consider rerouting trains carrying volatile Bakken crude oil from North Dakota so they do not pass through Minnesota’s biggest cities.
For Franken, the possibility of rerouting is an integral part of a comprehensive response to a recent rash of fiery oil train derailments that also includes stabilizing Bakken crude before it is loaded into stronger tanker cars.
For the nation’s powerful railroad lobby, however, rerouting is an unwarranted intrusion into a rail safety system that the industry says works.
Government-ordered rerouting of private rail traffic is not exactly a snowball in hell. It is more like a blizzard in Bahrain — possible, but unprecedented.
In Minnesota and around the country, “rerouting issues ought to be high on everyone’s agenda,” said rail safety expert Fred Millar, who fought unsuccessfully against railroads to move chlorine trains out of the District of Columbia. “But rerouting has been pushed off the table.”
Congress created the Federal Railroad Administration in 1966. In nearly half a century it does not appear to have forced any railroads to reroute trains around big cities for safety reasons, despite computer modeling that estimates routing changes could lower citizens’ risks to hazardous materials derailments by 25 to 50 percent and reduce casualties in an actual derailment by half.
The Minnesota Department of Transportation (MnDOT) last week estimated that 326,170 state residents live within a half-mile of rail routes that carry oil from North Dakota across Minnesota. A half-mile is the federal emergency response evacuation zone required in the event of a single tanker car spill and fire. Multiple-car fires require up to a mile evacuation.
MnDOT data shows that 156,316 of the Minnesotans subject to evacuation in an oil train derailment live in the Twin Cities metro area. Most North Dakota oil trains enter Minnesota at Moorhead, then travel on BNSF Railway and Canadian Pacific Railway tracks into the Twin Cities before turning south along the Mississippi River and east across Wisconsin. A few oil trains travel through western Minnesota into Iowa.
Although the National Transportation Safety Board has backed rerouting in some circumstances, federal laws passed in 2007 grant private rail companies wide latitude in determining when and where trains should move, even trains carrying hazardous materials.
Canadian Pacific did not comment specifically on rerouting trains in Minnesota, but in an e-mail to the Star Tribune, the railroad said it has voluntarily complied with the federal government’s Crude by Rail Safety Initiatives and performed “route risk assessments.”
BNSF, the largest crude-by-rail hauler out of North Dakota, declined to comment on rerouting and referred questions to the rail industry’s major trade group, the Association of American Railroads.
An AAR spokesman said the industry opposes re-routing oil trains because the existing routes are the safest, even when they pass through urban areas. The industry supports more structurally secure tanker cars, track inspections and training of emergency response teams, said AAR media relations director Ed Greenberg.
BNSF also has invested heavily in track improvements to increase safety along its existing Minnesota oil train routes.
“We’re using routing technology called the Rail Corridor Risk Management System developed by the federal government,” Greenberg said. The technology measures 27 factors — including population density — to determine the safest route for moving hazardous materials, including crude oil, Greenberg said.
“Rerouting isn’t the answer,” he maintained. “All it has accomplished in the past is to force rail traffic through other communities on tracks not built to accommodate products like crude oil.”
The Federal Railroad Administration declined to discuss rerouting oil trains in Minnesota. In an e-mail statement, acting administrator Sarah Feinberg said of Franken’s request: “Over the past 18 months we have taken more than a dozen actions to enhance the safe transport of crude oil while working on a comprehensive rule that is now in its final stages of development.”
The state has little say in the rerouting debate. “The railroads are regulated by the federal government,” Minnesota Department of Transportation spokesman Kevin Gutknecht said. “The state does not have the authority to move, or reroute, rail lines.”
Rerouting trains away from the Twin Cities is not part of a rail safety initiative unveiled March 13 by Gov. Mark Dayton. That proposal calls for spending $330 million over 10 years, much of it in greater Minnesota, mainly to make road-rail crossings safer and to improve emergency response.
Top 10 Questions About Oil Trains: Industry Lobbies for Weak Rules While Derailment Fire Rages
By Todd Paglia, ForestEthics, 03/19/2015 1:59 pm EDT
On Friday, March 6, while an oil train explosion in Illinois was still sending flames and black smoke into the air, railroad agents were in Washington, DC lobbying to weaken new train safety standards. Safer brakes are “extremely costly…” they told White House officials, and explained in great detail why speed limits are impractical. Like the auto industry resisting seatbelts, the rail industry is on the wrong track when it comes to safety.
In the last month, there have been six derailments of crude oil trains in the U.S. and Canada — three of them ignited, sending flames and mushroom clouds hundreds of feet into the air. Luckily, these were in relatively remote locations and no one was killed.
These disasters are not an aberration — oil train traffic is skyrocketing, which means more derailments and more explosions. The oil and rail industries hope to increase further the amount of crude oil barreling down the tracks in the coming years. Before that happens, ForestEthics has some questions we’d like to see the Obama administration ask the army of lobbyists who are trying to push the bar on safety even lower than it already is:
When did trains start exploding?
Rail transportation of crude oil is growing rapidly and dangerously — from fewer than 10,000 carloads in 2008 to nearly half a million in 2014 — for two reasons: Bakken oil from North Dakota and Canadian tar sands. The North American boom means oil companies are trying to tails and mine more of this extreme oil, crude that is high in carbon, difficult and expensive to produce, and dangerous to transport.
Are cities and towns with rail lines safe?
With the exception of Capitol Hill (the rail industry seems to be sparing Washington, DC) most routing is done specifically throughout cities and towns. No, the oil and rail industries are probably not purposely targeting us, it’s just that the rails in populated places tend to be better maintained and rated for heavier cargoes. The sane thing to do would be to stop hauling crude oil if it can’t be transported safely. A far distant next best is to make these trains as safe as possible and require rerouting around cities and water supplies.
What is the government doing?
Not nearly enough. While 100-plus car trains full of an explosive crude roll through our towns, the U.S. government is barely moving, bogged down by nearly 100 of Washington’s most expensive K-Street lobbyists. In fall 2014, ForestEthics, Earthjustice, and the Sierra Club sued the Department of Transportation to speed up new safety standards on oil trains. We called the trains an imminent danger to public safety. The federal government responded by once again delaying their decision on new rules that have been in the works for years.
What is the slowest speed at which an oil explosion could happen?
An oil tank car can catch fire and explode in an accident at zero miles per hour. Assuming a slightly raised rail bed, an oil car that tips over while standing still (this can and has happened on poorly maintained rails) will strike the ground going approximately 16 miles per hour — more than fast enough to breach the tank, spark, and ignite if it hits a rock, a curb, any hard protrusion.
Do firefighters know when and where oil trains are moving?
First responders do not know when, where, how much oil, and what kind is coming through their town. The US Department of Transportation ordered that railroads and oil companies make this information public. But only for trains carrying more than a million gallons of Bakken crude, and even this information is not being made public on a consistent basis.
How do you extinguish oil train fire?
You don’t put out an oil train fire; nobody does. Oil fires require specialized foam, which fire departments do not have in nearly sufficient supply to fight the fire from even a single 30,000 gallon tank car. All firefighters can do is evacuate those in danger, move outside the one mile blast zone and let the fire burn out, which can take days. In Illinois, firefighters unloaded their equipment to fight an oil train fire, realized the danger and left behind $10,000 in equipment getting out of harm’s way. You can prevent these fires by banning oil trains — but you can’t fight these fires once they happen.
The older oil cars are definitely unsafe, what about the newer ones?
The antiquated DOT-111 tank cars make up 80 percent of the fleet in the U.S. — U.S. rail safety officials first called them “inadequate” to haul crude oil more than 20 years ago. The jury is now in on the newer CPC-1232 tank cars and they are not much safer. The derailments and explosions in West Virginia and Illinois were 1232s traveling at or below the speed limit. In fact, the former head of the federal rail safety agency said in a radio interview that the recent derailments and fires were “the last nail in the coffin” for the CPC-1232 as an alternative to DOT-111 for oil transport.
We know that Bakken crude explodes; does tar sands explode?
Ordinarily it might not, but to move tar sands by rail (or pipeline for that matter) you have to mix in highly flammable, toxic diluents (light petroleum products like propane.) So if it’s on a train or in a pipeline the flashpoint for tar sands crude is lower than for Bakken oil. The oil train explosion on February 16, 2015 in Ontario, Canada occurred in -40 degrees F weather — proving that this stuff can ignite even in arctic cold. So not only is tar sands the dirtiest oil on Earth, but also it may well be the most dangerous too.
Do I live in the Blast Zone?
ForestEthics used oil rail routes from industry, Google maps, and census data to calculate that 25 million Americans live in the oil train blast zone — the dangerous evacuation zone in the case of an oil train derailment and fire. You can use the map to see if your home, office, school, or favorite natural area, landmark or sports stadium is in danger. Visit www.blast-zone.org.
What’s the solution?
The solution is to ban oil trains. If you can’t do something safely, you shouldn’t do it at all. This cargo is too dangerous to our families, our cities, our drinking water, our wildlife and our climate. The extreme crude carried on trains is only a tiny fraction of the oil we use each day as a nation. So while we transition our economy to clean energy and get beyond all oil, we should leave this extreme oil from Alberta and North Dakota in the ground.
Via Rail pondering alternative Ontario routing for suspended Canadian
By David Thomas, Contributing Editor, March 20, 2015
After months of late arrivals due to track congestion on CN’s northern Ontario main line, compounded by slow orders arising from CN’s efforts to recover from two tar sands oil train explosions, Via Rail is examining an alternative routing for the Canadian, the continent’s last classic streamliner, originally Canadian Pacific’s premier luxury passenger train.
Via suspended Canadian service between Winnipeg and Toronto March 11, citing the impossibility of maintaining schedules as CN dealt with the oil train mishaps near Gogama.
One option is to shift to CP trackage between Winnipeg, Manitoba, and Sudbury, Ontario, something Via Rail CEO Yves Desjardins-Siciliano hinted at last November during an interview with Railway Age. The motive, he said then, would be to provide passengers with a more scenic route closer to the Great Lakes, while at the same time serving more communities.
The imperative now is simply to get the train running again before the summer tourism season.
A contract would have to be negotiated with CP, and Via’s engineers would need to be qualified on CP track and operations, something that could take up to two months. Via will consider next week whether it can restore northern Ontario service over CN tracks, either indefinitely or pending a move to CP.
A Growing Risk: Oil Trains Raise Safety and Environmental Concerns
By Cory Golden, in the February 2015 issue of Western City
More and more often, trains snake down through California from its northern borders, with locomotives leading long lines of tank cars brimming with volatile crude oil.
Rail remains among the safest modes of transport, but the growing volume of crude being hauled to California refineries — coupled with televised images of fiery oil train accidents elsewhere — have ratcheted up the safety and environmental concerns of city officials and the residents they serve.
Local and state lawmakers have found that their hands are largely tied by federal laws and court rulings pre-empting new state and local regulation of rail traffic.
Growing Volume and an Increasing Number of Accidents
Until recently, California’s refineries were served almost entirely through ports. An oil boom in North Dakota and Canada from the Bakken shale formation and a lack of pipeline infrastructure have led to a dramatic increase in oil-by-rail shipments nationwide.
Oil imports to California by rail shot up 506 percent to 6.3 million barrels in 2013 (one barrel equals 42 gallons). That number will climb to 150 million barrels by 2016, according to the California Energy Commission.
The surge represents an “unanticipated, unacceptable risk posed to California,” said Paul King, deputy director for the California Public Utilities Commission’s Office of Oil Rail Safety, during a Senate hearing last year.
As the volume of oil being transported by rail has swelled, derailments in the United States and Canada have also increased. Despite $5 billion in industry spending on infrastructure and safety measures — with half of that for maintenance — railroads spilled more crude in the United States during 2013 than in the previous four decades combined, according to an analysis of federal data by McClatchy DC News.
Railroads continue to boast a better than 99 percent safety record, and most spills have been small, but with each tank car holding more than 25,000 gallons of oil, the exceptions — including eight mishaps in 2013 and early 2014 — have been dramatic and devastating, none more so than an accident in July 2013. That’s when 63 cars from a runaway train exploded, leveling much of Lac-Mégantic, Quebec, and killing 47 people.
So far, California has been spared a major crude oil accident, but the number of spills here is climbing: from 98 in 2010 to 182 in 2013, according to the California Office of Emergency Services (OES).
Trains carrying Bakken crude travel south through Northern California, turning from the western slope of the Sierra Nevada and rumbling through the hearts of cities large and small. The trains pass within blocks of the state Capitol, hospitals and schools and through sensitive ecological areas such as the Feather River Canyon and Suisun Marsh.
Lethal Accidents Spur a Push for Increased Safety Measures
The Lac-Mégantic accident and others that have followed have led to a push for change at the federal level. Two agencies of the U.S. Department of Transportation (DOT), the Federal Railroad Administration and Pipeline and Hazardous Materials Safety Administration, shoulder responsibility for writing and enforcing railroad safety regulations.
In early 2014, the DOT and railroad industry announced a series of voluntary steps to increase safety. The DOT released a comprehensive rule-making proposal in July 2014, calling for structurally stronger tank cars, new operating requirements, speed restrictions, enhanced braking controls and route risk assessments, and a classification and testing program for mined gases and liquids.
The DOT proposal calls for phasing out within two years older model tank cars, called DOT-111s, long known to be vulnerable to rupturing in a crash. The National Transportation Safety Board, which investigates accidents, first urged replacing or retrofitting them in 1991.
In September 2014, the American Petroleum Institute and Association of American Railroads jointly asked the DOT for more time — up to seven years to retrofit tank cars.
Another safety measure, called positive train control (PTC), makes use of global positioning systems. It is intended to prevent collisions, derailments due to high speeds and other movements that could cause accidents, like a train using track where maintenance is under way. PTC can alert train crews to danger and even stop a train remotely.
Following a 2008 Metrolink crash in Los Angeles that killed 25 people — caused when an engineer missed a stop signal and collided with a Union Pacific freight train — Congress mandated PTC implementation on 60,000 miles of track nationwide. Large railroads have spent $4.5 billion to implement the technology, but the industry says it cannot meet its 2015 deadline.
Among the members of California’s congressional delegation demanding stricter regulations are Senators Dianne Feinstein and Barbara Boxer, who have called for more information to be released to first responders on train movements.
Sen. Feinstein also wrote a letter that urged the DOT to include pneumatic brakes, which can greatly reduce stopping distances, in its planned review of tank car design, and to extend the PTC requirement to any route used by trains carrying flammable liquids near population centers or sensitive habitat.
Meanwhile, Industry Continues to Grow
The growth in domestic crude oil is reflected in projects that include seven proposed, completed or under-construction expansions that together would have a maximum oil-by-rail capacity of 561,000 barrels per day at Bakersfield, Benicia, Pittsburg, Santa Maria, Stockton and Desert Hot Springs (see “Increasing Refinery Capacity” below).
As of December 2014, the Kinder Morgan Inc. facility in Richmond was the only refinery that could receive unit trains, which are trains with 100 or more tank cars carrying a single commodity and bound for the same destination.
InterState Oil Co. had its permit to offload crude at McClellan Park, in Sacramento County, revoked in November 2014 by the Sacramento Metropolitan Air Quality Management District. The district said it had issued the permit in error and that it required a full review under the California Environmental Quality Act.
Refineries in Bakersfield, Vernon, Carson and Long Beach were receiving crude deliveries from manifest trains, which carry a mix of cargo.
Safety Efforts Focus on Planning, Preparedness and Response
The Federal Rail Safety Act of 1970 authorized the U.S. secretary of transportation to create uniform national safety regulations. States are allowed to adopt additional, compatible rules if they do not hinder interstate commerce and address a local safety hazard. Courts have consistently ruled against almost all attempts by states to use the local safety hazard exception, however.
Thus, unable to regulate train movements, California lawmakers and agencies have pursued three main courses of action: planning, preparedness and response.
In the Golden State, the California Public Utilities Commission (CPUC) shares authority with the federal government to enforce federal safety requirements, and OES and local agencies lead emergency response. In 2014, Gov. Jerry Brown expanded the Department of Fish and Wildlife’s Office of Spill Prevention and Response to include inland areas.
The Legislature approved a Senate Joint Resolution, SJR 27 (Padilla), urging the DOT to safeguard communities and habitat, strengthen the tank car fleet, mandate the earlier voluntary safety agreement with railroads and prioritize safety over cost effectiveness.
Recent legislation includes AB 380 (Dickinson, Chapter 533, Statutes of 2014), which calls for increased spill-response planning for state and local agencies and requires carriers to submit commodity flow data to OES, and SB 1064 (Hill, Chapter 557, Statutes of 2014), which seeks to improve accountability and transparency regarding CPUC’s responses to federal safety recommendations.
The FY 2014–15 state budget also allocated $10 million to the CPUC, which planned to add seven more track inspectors, and authorized the state oil spill prevention fund to be used for spills in inland areas. In addition, the budget expanded the 6.5 cent per-barrel fee to include all crude oil entering the state.
The 10 state agencies that have some hand in rail safety and accident response have formed the Interagency Rail Safety Working Group. It issued a report last June that called for, among other things, older tank cars to be removed from service, stronger cars, improved braking, PTC and better markings on cars so that firefighters know how to proceed in an accident.
Speaking to Richmond residents in December 2014, Gordon Schremp, senior fuels specialist for the California Energy Commission, welcomed the moves to increase safety at the federal level. All indications were that railroads were complying with new measures like lower speed limits, he said.
“Does it mean there will be zero derailments? No, but the goal is to get there,” said Schremp.
Local government officials face a daunting challenge when it comes to disaster response.
The Interagency Rail Safety Working Group also found that, as of June 2014, there were no hazardous materials response teams in rural areas of Northern California and units in other areas of the state lacked the training and equipment needed to take a lead role. Forty percent of the state’s firefighters are volunteers.
“Training is of the utmost importance,” said Deputy Chief Thomas Campbell, who oversees the Cal OES Hazardous Materials Programs. “We understand that local governments are limited in finances and that it’s difficult to get firefighters out of rural communities to train because they are volunteers.”
Some Local Communities Oppose Expansion
At the local level the proposed expansion of California refineries sometimes has run into heated opposition.
After news reports revealed that Bakken crude was being transported into the City of Richmond, City Manager Bill Lindsay wrote a letter to the Bay Area Air Quality Management District in November 2014 calling for it to revoke energy company Kinder Morgan’s permit to offload the crude there. That followed a lawsuit filed by environmental groups to revoke the permit — a suit tossed out by the judge because it was filed too late.
Elsewhere, a proposal by Valero Energy Corp. would bring 1.4 million gallons of crude daily to its Benicia refinery. The proposal has been met with letters questioning the city’s environmental and safety analysis from senders that have included the CPUC, Office of Spill Prevention and Response, the Sacramento Area Council of Governments, the Capitol Corridor Joint Powers Authority and cities along the rail line, including Davis and Sacramento. The Union Pacific Railroad has responded by stressing federal pre-emption of rail traffic.
Even as those proposals played out, a pair of derailments in Northern California underscored the importance of the debate. While neither spill involved crude oil or hazardous materials, both served as a warning of the need for California to improve its emergency response capability. Eleven cars carrying freight derailed and spilled into the Feather River Canyon near Belden on Nov. 25, 2014. Three days later, one car tumbled off the tracks near Richmond. The cars were loaded with corn in the first instance and refrigerated pork in the second.
What’s Ahead
The League continues to closely monitor developments in oil by rail. In September 2014 the League made recommendations to the DOT on the federal rule-making governing rail safety. The recommendations included providing more information and training to first responders, mandating speed limits and stronger tank cars, and using all available data to assess the risks and consequences of crude oil transport. Two months later, the National League of Cities passed a resolution stressing many of the same safety measures.
League of California Cities staff conducted a series of webinars during fall 2014 to better acquaint members with the oil-by-rail issue, and its Public Safety and Transportation policy committees took up the subject in January 2015 meetings.
Increasing Refinery Capacity
The California Energy Commission is tracking the following projects, which would dramatically increase the oil-by-rail capacity of refineries:
Plains All American Pipeline LP in Bakersfield, which took its first delivery in November 2014, has a capacity of 65,000 barrels per day (bpd);
Alon USA Energy Inc. in Bakersfield, under construction, will be able to receive 150,000 bpd;
Valero Energy Corp. in Benicia, which is presently undergoing permit review, would have a 70,000 bpd capacity;
WesPac Energy-Pittsburg LLC in Pittsburg, undergoing permit review, could receive up 50,000 bpd by rail and 192,000 bpd through its marine terminal; and
Phillips 66 in Santa Maria, undergoing permit review, could accept 41,000 bpd.
In addition, Targa Resources Corp. at the Port of Stockton is planning an expansion that would enable it to receive 65,000 bpd. And Questar Gas Corp. is planning a project that could see it offload 120,000 bpd near Desert Hot Springs, then send it through a repurposed 96-mile pipeline to Los Angeles.
Photo credits: Ksb/Shutterstock.com; Steven Frame/Shutterstock.com.